Find Jobs for Military Veterans in Pennsylvania

Job Description

Job Description

3rd Shift

Job Responsibilities

1. Troubleshoots welding processes, tooling, and equipment and suggests corrective actions to resolve.
2. Notifies production leaders of any process improvements being addressed and if workflow deviation is necessary.
3. Completes process checks on the manufacturing floor to verify weld compliance and capability.
4. Maintains welding process documents. Ensures each workstation has the necessary and accurate documentation.
5. Runs capability studies and documents appropriately.
6. Trains manufacturing personnel on process changes or updates.
7. Assists in launches by following sample parts and new jobs through production. Ensures each new part is placed in quarantine and inspected appropriately.
8. Analyzes scrap and rework and suggests corrective action.
9. Assists weld operators and welders.
10. Performs other duties as assigned.

Job Skills Requirements

• Ability to read and interpret complex blueprints, drawings, and schematics. 
• Strong knowledge of welding standards and safety practices. 
• Strong attention to detail and commitment to the highest quality workmanship. 
• Physical stamina to work in various positions for extended periods. 

Educational Requirements

• High School Diploma, GED, or equivalent education required.

Experience Requirements

• Three years professional welding experience in the manufacturing industry.
• Equivalent combination of education and experience may be considered.

Physical & Environmental Requirements

• Some physical demand. Often lifts light to heavy-weight material. Frequent lifting/moving average weight (up to 50 lbs/11-27 kgs) material.  
• Ability to perform occasional to frequent pushing, pulling, bending, kneeling, twisting, crawling, and/or reaching over a full work shift (8-12 hours).  
• Ability to operate machinery over a full work shift (8-12 hours).  
• Ability to stand and / or walk constantly over a full work shift on concrete (8-12 hours).  
• May be exposed to noise levels for which hearing protection must be worn over a full work shift (8-12 hours).  

Job Description

Job Description

Available Shift: 1st and 3rd

Duties and Responsibilities:

• Ability to troubleshoot issues on electronically controlled equipment used in a metal fabrication environment such as lasers, brake presses, robots, etc…
• Interface with remote service support for problem solving and equipment repairs.
• Possess the ability to perform repair tasks on industrial manufacturing equipment and building systems in a safe and timely manner, and to implement corrective actions to prevent future breakdowns.
• Capable of working alone with minimal direct supervision – a self-motivated individual with safe working habits and sound decision-making skills is a must.
• Experience working with 3 phase electrical systems up to 480VAC.
• Must have a focus on performing the job safely: use of all required PPE, following all safety rules and policies including L.O.T.O., Confined Space, etc.
• Prefer candidates with electrical experience

Job Description

Shift: 1st and 3rd shift available!

$1000 Sign on Bonus!

Job Responsibilities?  

1. Reads and interprets basic blueprints, drawings, and work instructions to plan welding operations. 
2.  Performs basic welding equipment setup to produce fabricated components.
3.  Prepares materials for welding by cleaning surfaces and fitting components.
4. Inspects completed welds visually and using testing methods to ensure they meet quality standards.
5.  Assists in troubleshooting and repairing welds.
6. Maintains welding equipment and tools in good working condition. 
7. Follows all safety regulations and wear appropriate personal protective equipment (PPE). 
8. May operate machinery including welding robots, saws, and grinders. 

• Basic understanding of welding processes and techniques.
• Ability to read and interpret basic blueprints, drawings, and welding symbols. 
• General knowledge of welding codes, standards, and safety practices. 
• Attention to detail and commitment to learning quality workmanship. 
• Physical stamina to work in various positions for extended periods. 
• Good hand-eye coordination and manual dexterity. 

• High School Diploma or equivalent education and experience.? 

• Some prior experience or training in welding preferred but not required.
• Willingness to complete a certified welding program or apprenticeship is preferred.

• Some physical demand; often lifts light to heavy-weight material. Frequent lifting/moving average weight (up to 50 lbs/11-27 kgs) material.? 
• Ability to perform occasional to frequent pushing, pulling, bending, kneeling, twisting, crawling and/or reaching over a full work shift (8-12 hours).? 
• Ability to operate motorized vehicles over a full work shift (8-12 hours).? 
• Ability to stand and / or walk constantly over a full work shift on concrete (8-12 hours).? 
• May be exposed to noise levels for which hearing protection is required to be worn over a full work shift (8-12 hours).? 

Job Description

Job Responsibilities

1. Coordinates material movement between departments per routing requirements.
2. Sorts questionable materials per Quality Control’s request.
3. Prints and distributes pick tickets and performs computer transactions as necessary.
4. Organizes sequence of pulling material and relays information to Material Support.
5. Ensures production schedules are met by timely and accurate processing and movement of goods. Assists during daily peak times to include operating material handling equipment and perform all necessary computer transactions.
6. Ensures good communication and feedback with management, employees on their shift, and between shifts.
7. When assigned, assists the supervisor/area manager with Continuous Improvement Projects, evaluation of new equipment, determination of training needs and interviewing/hiring.
8. Monitors and enforces shop floor control systems.
9. Utilize crane to move material
10. Follows all safety procedures, wears proper PPE. Proactively identifies and corrects unsafe conditions.
11. Other duties as assigned.

Job Skills Requirements

• Good organizational and time management skills.
• Ability to follow instructions and work independently or as part of a team.
• Basic math and computer skills.

Educational Requirements

• High school diploma or equivalent.

Experience Requirements

• One year of relevant experience and/or training preferred.
• Forklift Certification a plus

Physical Demands and Work Environment

• Some physical demand, often lifts light to heavy-weight material. Frequent lifting/moving average weight (up to 50 lbs/11-27 kgs) material.  
• Ability to perform occasional to frequent pushing, pulling, bending, kneeling, twisting, crawling and/or reaching over a full work shift (8-12 hours).  
• Ability to operate motorized vehicles over a full work shift (8-12 hours).  
• Ability to stand and / or walk constantly over a full work shift on concrete (8-12 hours).  
• May be exposed to noise levels for which hearing protection must be worn over a full work shift (8-12 hours).  

Bedford123

Job Description

Shift: 1st and 3rd shift available!

$1000 Sign on Bonus!

Job Responsibilities?  

1. Reads and interprets basic blueprints, drawings, and work instructions to plan welding operations. 
2.  Performs basic welding equipment setup to produce fabricated components.
3.  Prepares materials for welding by cleaning surfaces and fitting components.
4. Inspects completed welds visually and using testing methods to ensure they meet quality standards.
5.  Assists in troubleshooting and repairing welds.
6. Maintains welding equipment and tools in good working condition. 
7. Follows all safety regulations and wear appropriate personal protective equipment (PPE). 
8. May operate machinery including welding robots, saws, and grinders. 

• Basic understanding of welding processes and techniques.
• Ability to read and interpret basic blueprints, drawings, and welding symbols. 
• General knowledge of welding codes, standards, and safety practices. 
• Attention to detail and commitment to learning quality workmanship. 
• Physical stamina to work in various positions for extended periods. 
• Good hand-eye coordination and manual dexterity. 

• High School Diploma or equivalent education and experience.? 

• Some prior experience or training in welding preferred but not required.
• Willingness to complete a certified welding program or apprenticeship is preferred.

• Some physical demand; often lifts light to heavy-weight material. Frequent lifting/moving average weight (up to 50 lbs/11-27 kgs) material.? 
• Ability to perform occasional to frequent pushing, pulling, bending, kneeling, twisting, crawling and/or reaching over a full work shift (8-12 hours).? 
• Ability to operate motorized vehicles over a full work shift (8-12 hours).? 
• Ability to stand and / or walk constantly over a full work shift on concrete (8-12 hours).? 
• May be exposed to noise levels for which hearing protection is required to be worn over a full work shift (8-12 hours).? 

Job Description

Shift Available: 3rd

Job Responsibilities

1. Sets up, adjusts, and operates laboratory equipment and instruments.
2. Obtains sample for laboratory tests and bacteria checks.
3. Regulates and adjusts control devices to bring about proper chemical reaction.
4. Fills out mandatory regulatory test reports and labels hazardous waste drums correctly.
5. Cleans laboratory equipment and calibrates instruments.
6. Prepares chemical solutions.
7. Performs annual testing for customers.

Job Skills Requirements

• Computer skills
• Knowledge & use of electrostatic applications/powder coating processes/wet spray applications
• Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals
• Proficient communication skills
• Follow safety and environmental procedures
• Fluent in English and primary language used in area of responsibility and/or location

Educational Requirements

• High School Diploma or equivalent education and experience

Experience Requirements

• Paint Line experience required
• Computer skills required
• Strong understanding of chemicals required

Physical & Environmental Requirements

• Ability to sit, stand and/or walk constantly over a full work shift (8-12 hours)
• Ability to reach and/or pull for a full work shift (8-12 hours)

Job Description

Job Description

Shift: 1st and 3rd shift available!

$1000 Sign on Bonus!

Job Responsibilities?  

1. Reads and interprets basic blueprints, drawings, and work instructions to plan welding operations. 
2.  Performs basic welding equipment setup to produce fabricated components.
3.  Prepares materials for welding by cleaning surfaces and fitting components.
4. Inspects completed welds visually and using testing methods to ensure they meet quality standards.
5.  Assists in troubleshooting and repairing welds.
6. Maintains welding equipment and tools in good working condition. 
7. Follows all safety regulations and wear appropriate personal protective equipment (PPE). 
8. May operate machinery including welding robots, saws, and grinders. 

• Basic understanding of welding processes and techniques.
• Ability to read and interpret basic blueprints, drawings, and welding symbols. 
• General knowledge of welding codes, standards, and safety practices. 
• Attention to detail and commitment to learning quality workmanship. 
• Physical stamina to work in various positions for extended periods. 
• Good hand-eye coordination and manual dexterity. 

• High School Diploma or equivalent education and experience.? 

• Some prior experience or training in welding preferred but not required.
• Willingness to complete a certified welding program or apprenticeship is preferred.

• Some physical demand; often lifts light to heavy-weight material. Frequent lifting/moving average weight (up to 50 lbs/11-27 kgs) material.? 
• Ability to perform occasional to frequent pushing, pulling, bending, kneeling, twisting, crawling and/or reaching over a full work shift (8-12 hours).? 
• Ability to operate motorized vehicles over a full work shift (8-12 hours).? 
• Ability to stand and / or walk constantly over a full work shift on concrete (8-12 hours).? 
• May be exposed to noise levels for which hearing protection is required to be worn over a full work shift (8-12 hours).? 

Job Description

Job Description

Shift: 1st and 3rd shift available!

$1000 Sign on Bonus!

Job Responsibilities?  

1. Reads and interprets basic blueprints, drawings, and work instructions to plan welding operations. 
2.  Performs basic welding equipment setup to produce fabricated components.
3.  Prepares materials for welding by cleaning surfaces and fitting components.
4. Inspects completed welds visually and using testing methods to ensure they meet quality standards.
5.  Assists in troubleshooting and repairing welds.
6. Maintains welding equipment and tools in good working condition. 
7. Follows all safety regulations and wear appropriate personal protective equipment (PPE). 
8. May operate machinery including welding robots, saws, and grinders. 

• Basic understanding of welding processes and techniques.
• Ability to read and interpret basic blueprints, drawings, and welding symbols. 
• General knowledge of welding codes, standards, and safety practices. 
• Attention to detail and commitment to learning quality workmanship. 
• Physical stamina to work in various positions for extended periods. 
• Good hand-eye coordination and manual dexterity. 

• High School Diploma or equivalent education and experience.? 

• Some prior experience or training in welding preferred but not required.
• Willingness to complete a certified welding program or apprenticeship is preferred.

• Some physical demand; often lifts light to heavy-weight material. Frequent lifting/moving average weight (up to 50 lbs/11-27 kgs) material.? 
• Ability to perform occasional to frequent pushing, pulling, bending, kneeling, twisting, crawling and/or reaching over a full work shift (8-12 hours).? 
• Ability to operate motorized vehicles over a full work shift (8-12 hours).? 
• Ability to stand and / or walk constantly over a full work shift on concrete (8-12 hours).? 
• May be exposed to noise levels for which hearing protection is required to be worn over a full work shift (8-12 hours).? 

Job Description

Shift: 1st and 3rd shift available!

$1000 Sign on Bonus!

Job Responsibilities?  

1. Reads and interprets basic blueprints, drawings, and work instructions to plan welding operations. 
2.  Performs basic welding equipment setup to produce fabricated components.
3.  Prepares materials for welding by cleaning surfaces and fitting components.
4. Inspects completed welds visually and using testing methods to ensure they meet quality standards.
5.  Assists in troubleshooting and repairing welds.
6. Maintains welding equipment and tools in good working condition. 
7. Follows all safety regulations and wear appropriate personal protective equipment (PPE). 
8. May operate machinery including welding robots, saws, and grinders. 

• Basic understanding of welding processes and techniques.
• Ability to read and interpret basic blueprints, drawings, and welding symbols. 
• General knowledge of welding codes, standards, and safety practices. 
• Attention to detail and commitment to learning quality workmanship. 
• Physical stamina to work in various positions for extended periods. 
• Good hand-eye coordination and manual dexterity. 

• High School Diploma or equivalent education and experience.? 

• Some prior experience or training in welding preferred but not required.
• Willingness to complete a certified welding program or apprenticeship is preferred.

• Some physical demand; often lifts light to heavy-weight material. Frequent lifting/moving average weight (up to 50 lbs/11-27 kgs) material.? 
• Ability to perform occasional to frequent pushing, pulling, bending, kneeling, twisting, crawling and/or reaching over a full work shift (8-12 hours).? 
• Ability to operate motorized vehicles over a full work shift (8-12 hours).? 
• Ability to stand and / or walk constantly over a full work shift on concrete (8-12 hours).? 
• May be exposed to noise levels for which hearing protection is required to be worn over a full work shift (8-12 hours).?