Description

• Calibrate IM&TE equipment in one or more disciplines including:
  Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency
• Maintain secondary and working calibration standards
• Perform basic maintenance, troubleshooting, and repair of precision equipment
• Collect, measure, analyze, summarize, and record calibration data
• Identify out-of-tolerance conditions and perform corrective actions
• Identify and correct measurement errors
• Prepare calibration reports and certificates
• Adapt calibration equipment and techniques for non-standard measurement tasks
• Train junior technicians in calibration concepts and procedures
• Interact with technicians, customer service representatives, account managers, and customers
• Maintain laboratory housekeeping standards
• Perform additional duties as assigned

• High School Diploma or equivalent
• Minimum of 1 year of calibration experience (formal metrology training may offset experience)
• Ability to perform general math and algebra
• Basic troubleshooting skills for precision equipment
• Strong written and verbal communication skills
• Proficiency with Microsoft Word and Excel
• Basic computer skills
• Strong attention to detail and adherence to written procedures
• Excellent interpersonal and customer service skills
• Self-motivated and able to work both independently and as part of a team

• Ability to lift up to 45 lbs without assistance
• Occasional standing and bending required

• Laboratory and manufacturing environments
• Occasional work at customer sites
• Travel as required

Description

• Calibrate IM&TE equipment in one or more disciplines including:
  Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency
• Maintain secondary and working calibration standards
• Perform basic maintenance, troubleshooting, and repair of precision equipment
• Collect, measure, analyze, summarize, and record calibration data
• Identify out-of-tolerance conditions and perform corrective actions
• Identify and correct measurement errors
• Prepare calibration reports and certificates
• Adapt calibration equipment and techniques for non-standard measurement tasks
• Train junior technicians in calibration concepts and procedures
• Interact with technicians, customer service representatives, account managers, and customers
• Maintain laboratory housekeeping standards
• Perform additional duties as assigned

• High School Diploma or equivalent
• Minimum of 1 year of calibration experience (formal metrology training may offset experience)
• Ability to perform general math and algebra
• Basic troubleshooting skills for precision equipment
• Strong written and verbal communication skills
• Proficiency with Microsoft Word and Excel
• Basic computer skills
• Strong attention to detail and adherence to written procedures
• Excellent interpersonal and customer service skills
• Self-motivated and able to work both independently and as part of a team

• Ability to lift up to 45 lbs without assistance
• Occasional standing and bending required

• Laboratory and manufacturing environments
• Occasional work at customer sites
• Travel as required

Description

The Field Service Technician is responsible for providing on-site calibration, installation, and minor repair services for industrial weighing equipment, control systems, and related peripheral devices. This role plays a critical part in ensuring customer equipment operates accurately, safely, and reliably while delivering a high level of customer service.

Technicians work independently or as part of a regional field service team and represent the organization professionally at customer sites.

• Perform on-site calibration, installation, and maintenance of industrial weighing and material handling systems, including heavy-capacity scales
• Troubleshoot and repair mechanical, electronic, and electrical system issues
• Safely operate company vehicles, tools, and heavy-capacity test equipment
• Accurately complete calibration test reports, work orders, safety documentation, and daily service logs
• Communicate clearly and professionally with customers regarding schedules, service status, and findings
• Assist mentors and participate in rotational after-hours on-call coverage as required
• Identify customer challenges and promote appropriate products and services; collaborate on lead generation and service quotes
• Travel locally or regionally to customer sites to provide on-site service and support

• Minimum 3 years of experience in electronics, electrical systems, HVAC, PLCs, or a similar technical field
• Strong mechanical and electronic troubleshooting skills
• Ability to work independently and manage time effectively
• Clean driving record
• Ability to pass background check and drug screening
• Willingness and ability to obtain a Class B Commercial Driver’s License (CDL
  

Nice-to-Have Skills

• Prior experience servicing industrial scales or measurement equipment
• Field service or customer-facing technical support experience
• Experience working with industrial or material-handling environments

• Comprehensive medical, dental, and vision insurance
• Paid time off (PTO)
• Paid training and professional development
• Company vehicle and gas card provided

Description

CNC Machinist (2nd Shift) | Cleveland, OH

Employment Type: Full-Time

Location: Onsite – Cleveland, OH

About the Role

We're looking for an experienced CNC Machinist to operate large machining centers and help produce complex fabrications for submarines and other projects. You'll run machines, maintain and edit CNC programs, inspect parts, and mentor less experienced machinists—all while supporting continuous improvement in our manufacturing processes.

This is a great opportunity for someone who thrives in a hands-on, collaborative environment and wants to be part of a team producing challenging, purposeful work.

What You'll Do

• Review engineering prints and select appropriate tooling.
• Operate large CNC machining centers (VTL or HBM) and perform machine setups.
• Edit, maintain, and optimize CNC programs.
• Inspect and measure machined components using hand gages, CMM, and other tools.
• Implement continuous improvement initiatives in machining processes.
• Train and develop less experienced AT&F machinists.
• Collaborate with the team to ensure production goals, quality, and timelines are met.

Must-Have Skills and Experience

• 5+ years of experience in component CNC machining, preferably with lower run quantities.
• Proficient in interpreting blueprints, GD&T, and engineering drawings.
• Applied experience with inspection methods, including hand gages and CMM.
• Proven ability to develop the skills of other machinists.
• Proficiency with AutoCAD and CNC programming (Fanuc, Siemens, G code).
• Overhead crane operation and rigging experience.
• Basic computer skills for email and web-based communications.

Who You Are

• Skilled, hands-on machinist with a passion for precision and quality.
• Mentor-minded and collaborative, supporting team development.
• Detail-oriented and committed to continuous improvement.
• Dependable, safety-conscious, and proactive in problem-solving.

Additional Details

• Pay Range: $25.00 – $32.00 per hour (based on skills and experience).
• Benefits: Health, dental, vision, life insurance, 401(k), tuition reimbursement, paid time off, holidays, AT&F clothing program, profit sharing, wellness program, Military Veterans Resource Group, ESL classes, and opportunity for career growth.
• Culture: Join a forward-thinking, family-led organization that values teamwork, purposeful work, and craftsmanship.

Description

Safety Manager | Cleveland, OH

Employment Type: Full-Time

Location: Onsite – Cleveland, OH

About the Role

We're looking for a Safety Manager to lead and grow a proactive safety culture across all AT&F manufacturing sites. You'll set strategy, develop training programs, ensure OSHA compliance, and drive initiatives that protect our team members while supporting the production of large, complex fabrications for submarines and other projects.

This is a great opportunity for someone passionate about safety in manufacturing and who wants to make a meaningful impact on a team performing challenging and purposeful work.

What You'll Do

• Promote a safe working environment for all team members across multiple sites.
• Develop and implement strategies to drive a proactive safety culture.
• Maintain safety documentation to ensure OSHA and regulatory compliance.
• Coordinate and conduct new hire and ongoing safety training.
• Support and develop team members' safety knowledge through audits and coaching.
• Create in-house safety training videos and manage training schedules.
• Perform and train others on risk assessments and safe work practices.
• Conduct root cause analyses for safety incidents and develop preventive actions.
• Analyze safety data to identify trends, positive behaviors, and improvement opportunities.
• Maintain and oversee the Safety documentation system.
• Follow Environmental, Quality, and Safety Management System procedures.
• Perform other duties as assigned.

Must-Have Skills and Experience

• Bachelor's Degree in Occupational Safety and Health or related field.
• 2+ years of related safety experience, preferably in a manufacturing environment.
• Practical experience improving safety processes and culture.
• Working knowledge of OSHA regulations and compliance requirements.
• Excellent verbal and written communication skills.
• Ability to manage multiple tasks while maintaining attention to detail.
• Skilled in influencing others without direct authority.
• Experience interacting with local, state, and federal regulatory agencies.

Nice-to-Have Skills

• Experience creating in-house safety training materials (videos, manuals, workshops).
• Familiarity with analytics tools to track and evaluate safety performance.
• Experience in large-scale or industrial fabrication environments.

Who You Are

• A proactive leader passionate about creating a safe workplace.
• Analytical and detail-oriented, able to identify trends and opportunities.
• A collaborative communicator who can engage teams at all levels.
• Committed to continuous improvement and helping others succeed.

Additional Details

• Salary Range: $65,000 – $85,000 per year (based on skills and experience).
• Benefits: Medical, dental, vision, life insurance, 401(k), tuition reimbursement, paid time off, holidays, wellness program, and AT&F clothing program.
• Culture: Join a family-led, forward-thinking organization that values teamwork, purposeful work, and continuous growth.

Description

The Production Operator is responsible for operating, monitoring, and maintaining equipment used in the manufacturing and packaging of pharmaceutical products. This role ensures production processes are performed safely, efficiently, and in compliance with company procedures and regulatory requirements, including Good Manufacturing Practices (GMP)

• Perform manufacturing processes and operate production equipment, including, but not limited to: washers, autoclave, dry heat oven, heat sealers, vial washer, ultrasonic cleaner.
• Perform production operations according to Batch Records and Standard Operating Procedures (SOPs)
• Maintain proper documentation (batch records, production logs, etc.)
• Write and review master documents as applicable: SOPs and batch records
• Write Operation Deviation Reports
• Supervise contract production employees as applicable
• Maintain inventory of control warehouse space
• Perform production and maintenance activities in the Aseptic Processing Area (APA)
• Write and edit documents including: procedures, deviations, master batch records, protocols and reports as necessary
• Perform initial assembly and review of completed production records for completeness
• Maintain order and cleanliness in production area

• Ability to read and write English.
• Dress, speak and act in a professional manner
• Physically able to stand for extended periods of time, mover objects up to 50 pounds, bend and reach to access equipment, have near vision correctable to 20/20 and be able to wear corrective eyewear to achieve this, if necessary.
• Must be capable of working in close proximity to other employees, regardless of gender, in the confined environment of the production facility.
• Must be capable of working in the clean room for uninterrupted extended periods
• Ability to maintain neat and accurate records required
• Must be able to work with minimal supervision.
• Technical military experience is highly desired

Description

REVITALIZING
AMERICA’S MARITIME FUTURE

Mission-Driven
Partnership

Meet ADDMAN
Precision

The Role

• Setup, operate
  and perform daily maintenance on manufacturing machines.
• Strictly
  adheres to proper use of personal protective equipment (PPE).
• Makes high
  quality parts to specifications.
• Helps develop
  workable methods for machining operations.
• Makes proper
  use of machines, tooling, and inspection equipment.
• Sets up,
  machines, and inspects all required operations.
• Proficient at
  inspecting sizes and geometries down to .0002”.
• Provides
  leadership and guidance to less experienced machinists to upgrade their
  machining, inspection, and problem-solving skills.

Skill
Requirements

• Commitment to a
  safety culture where safety is the first consideration before starting any
  task.
• Proficient on
  manual and CNC mills, manual and CNC lathes, hand filing, and deburring
  process.
• Proficient at
  programming and makes full use of all the CNC control functions.
• Develops
  effective methods.
• Sets up tools
  and fixtures.
• Selects and
  uses inspection equipment and techniques.
• Interpret
  drawings and specifications.
• Determines
  acceptability of quality of work.
• Resolves
  process issues.
• Deburrs and
  finishes at a high level of quality.
• Meets time and
  quality standards.
• Seeks out
  additional duties when it is needed.
• Brings up
  potential problems with suggested solutions.
• Promotes a
  positive environment through what is said and by setting an example.

Qualifications

• Graduate of
  related two-year vocational school program and three years related work
  experience and/or training; or equivalent combination of education and
  experience.
• Able to work in
  a dynamic environment with changing priorities to exceed customer expectations.
• Works
  independently, strong work ethic, is self-motivated and able to complete tasks
  with minimal supervision.
• Ability to work
  on cross-functional teams to support the core business, ensuring quality
  products are delivered on time.
• Computer
  aptitude (Outlook, PowerPoint, Word and Excel).
• Ability to
  read, write, and communicate in the English language.
• Must be a team
  player and willing to learn new skills and concepts.
• Eligible to
  work in the United States without company sponsorship.

• The performance
  of this position will require exposure to the manufacturing areas where all
  areas require the use of personal protective equipment such as safety glasses,
  hearing protection, steel toe shops, and other mandatory safety equipment.
• For the most
  part, ambient temperatures with typical plant lighting and manufacturing
  equipment are present throughout the facility.
• Sit or stand as
  needed.
• Walking
  primarily on a level surface for periodic periods throughout the day.
• Reaching above
  shoulder height, below the waist, or lifting as required to reach documents or
  store materials throughout the workday.
• Proper lifting
  techniques required.
• Ability and
  comfortability to work in small confine spaces while following proper safety
  protocol.

Description

As a MARC Technician, you will monitor site conditions, triage incoming alarms, and respond to operational incidents in a 24/7/365 environment. You will assist in incident investigations, support multiple projects, and contribute to continuous improvement in facility operations.

What You'll Do:

Must-Have Skills, Experience, and Education:

Veteran-Friendly Skills Transfer:

Work Environment:

Description

Junior Operations Manager | Cleveland, OH

About the Role

What You'll Do

• Ensure compliance with safety programs, quality standards, OPX initiatives, work instructions, and timekeeping practices.
• Lead and coordinate production team activities to meet schedules, quality targets, and estimated hours.
• Utilize EOS Toolkit to coach your team, set expectations, and maintain strong relationships to drive retention.
• Support team members by troubleshooting issues and ensuring they have the necessary tools, materials, and information to complete jobs.
• Review production plans and communicate priorities to your team.
• Mentor, motivate, and counsel team members to improve performance and engagement.
• Promote AT&F's Core Values and Strategic Plan.
• Identify and implement continuous improvement opportunities in processes and workflow.
• Drive quality improvements and support on-time delivery to ensure customer success.
• Assess staffing needs and delegate tasks and responsibilities effectively.
• Conduct quarterly conversations with team members to maintain clear communication and expectations.
• Perform administrative duties including payroll, time-off requests, and policy administration.
• Perform other duties as assigned.

Must-Have Skills and Experience

• 3+ years of manufacturing management experience.
• Experience coordinating and mentoring production teams.
• Excellent verbal, written, and interpersonal communication skills.
• Strong knowledge of Microsoft Office Suite.
• Ability to make decisions, be accountable, and communicate openly.
• Dependable, flexible, and proactive in managing operations and team needs.

Nice-to-Have Skills

• Experience in welding and/or steel fabrication.
• Bachelor's degree (preferred but not required).
• Familiarity with operational excellence frameworks and production management tools.

Who You Are

• A hands-on leader who inspires and motivates others.
• Honest, respectful, and professional in all interactions.
• Committed to success, safety, and continuous improvement.
• Able to balance team support with accountability for results.

Additional Details

• Salary Range: $80,000 – $95,000 per year (based on skills and experience).
• Benefits: Medical, dental, vision, life insurance, 401(k), tuition reimbursement, paid time off, holidays, wellness program, and AT&F clothing program.
• Culture: Join a family-led, forward-thinking organization that values teamwork, purposeful work, and continuous growth.

Description

As a Senior Critical Facilities Manager, you will oversee the daily operations of mission-critical data center facilities and associated infrastructure. This role is responsible for ensuring operational reliability, managing facility teams and third-party providers, and delivering an exceptional experience for customers utilizing the facility.

• Oversee daily operations of critical facilities through coordination with on-site engineering teams.
• Manage preventive and corrective maintenance programs across regional facilities.
• Provide operational leadership and guidance during incidents and technical issues.
• Maintain and enforce operational policies, procedures, and facility standards.

• Manage relationships with third-party facility management providers.
• Coordinate staff performance reviews, scheduling, development, and training needs.
• Oversee vendors performing work within the data center environment.

• Maintain asset tracking processes and reporting systems.
• Monitor facility capacity thresholds and maintain forecasting for future infrastructure requirements.
• Provide reporting on asset utilization for both internal stakeholders and customers.

• Lead incident management processes from initial response through resolution and root cause analysis documentation.
• Ensure proper communication and documentation throughout incident response activities.

• Serve as a key point of contact for local customer teams and operational issues.
• Coordinate implementation activities for customer orders, infrastructure builds, and facility modifications.
• Support sales teams by providing facility tours and technical insights for potential new customers.
• Review customer contracts and support customer audits when required.

• Manage required internal and external operational reporting.
• Coordinate with internal teams including finance, compliance, safety, and security for monthly reporting requirements.
• Maintain documentation for certifications, regulatory requirements, and operational audits.
• Support business continuity planning and operational readiness initiatives.

• Manage operational expenditures (OPEX) for assigned facilities.
• Develop capital expenditure (CAPEX) plans for equipment maintenance, upgrades, and replacement.

Must-Have Skills, Experience, and Education:

• 7+ years of experience managing critical infrastructure operations, preferably in a data center or mission-critical environment.
• 10+ years of supervisory or personnel management experience preferred.
• Strong knowledge of facility operations, maintenance programs, and operational reliability.
• Excellent communication and organizational skills with the ability to collaborate across multiple teams.
• Proven ability to manage multiple priorities and operate effectively in high-pressure environments.
• Strong customer service mindset and ability to build relationships with internal and external stakeholders.
• Experience developing procedures and training technical teams.
• Proficiency with Microsoft Office applications.
• Education
• Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or related technical field preferred.
• Equivalent professional experience will also be considered.

• Position located in Ashburn, Virginia.
• Must be able to lift up to 50 pounds.
• May require extended hours or on-site support during emergency situations.
• Ability to work in high-availability, mission-critical facility environments.
  

Description

CNC Machinist with ADDMAN Precision

• 2nd Shift hours are 6pm-4:30am Monday - Thursday
• 3rd Shift hours are 6am-6pm Friday - Sunday
• 4th Shift hours are 5pm-5:00am Friday - Sunday

• Setup, operate and perform daily maintenance on manufacturing machines.
• Strictly adheres to proper use of personal protective equipment (PPE).
• Makes high quality parts to specifications.
• Helps develop workable methods for machining operations.
• Makes proper use of machines, tooling, and inspection equipment.
• Sets up, machines, and inspects all required operations.
• Proficient at inspecting sizes and geometries down to .0002”.
• Provides leadership and guidance to less experienced machinists to upgrade their machining, inspection, and problem-solving skills.

• Commitment to a safety culture where safety is the first consideration before starting any task.
• Proficient on manual and CNC mills, manual and CNC lathes, hand filing, and deburring process.
• Proficient at programming and makes full use of all the CNC control functions.
• Develops effective methods.
• Sets up tools and fixtures.
• Selects and uses inspection equipment and techniques.
• Interpret drawings and specifications.
• Determines acceptability of quality of work.
• Resolves process issues.
• Deburrs and finishes at a high level of quality.
• Meets time and quality standards.
• Seeks out additional duties when it is needed.
• Brings up potential problems with suggested solutions.
• Promotes a positive environment through what is said and by setting an example.

• Graduate of related two-year vocational school program and three years related work experience and/or training; or equivalent combination of education and experience.
• Able to work in a dynamic environment with changing priorities to exceed customer expectations.
• Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision.
• Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time.
• Computer aptitude (Outlook, PowerPoint, Word and Excel).
• Ability to read, write, and communicate in the English language.
• Must be a team player and willing to learn new skills and concepts.
• Eligible to work in the United States without company sponsorship.

• Medical, Dental, and Vision plans
• Life Insurance, Long & Short-Term Disability
• Flexible Spending Account and Dependent Care Spending Account
• 401(k) Retirement with Company Match
• Employee Assistance Program
• Paid time off and 10 paid holidays (including your birthday)
• Paid parental leave
• Additional opt in offerings

• The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment.
• For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility.

• Sit or stand as needed.
• Walking primarily on a level surface for periodic periods throughout the day.
• Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday.
• Proper lifting techniques required.
• Ability and comfortability to work in small confine spaces while following proper safety protocol.

Description

The company provides top of the line, full and partial automation solutions for both direct mail and retail pharmacies. The OptiFill and RIVA service groups provide support and expertise to the customers on company equipment and product lines. Field Service Representative(s) will be primarily responsible for providing Level 2 technical support to customers and third-party Level 1 support vendors, along with managing and maintaining the relationship with the customers on behalf of the company.

• Focus on customer needs and satisfaction by troubleshooting, installation, validation, maintenance and service repair needs on pharmacy automated equipment.
• Perform 2nd Level hardware preventive and corrective maintenance, as well as some software maintenance.
• Schedule 1st Level (3rd party) resources, including preventative maintenance and service calls.
• Monitor and support 1st Level (3rd party) resources to complete emergency break fix service calls.
• Support the facility group with any enhancements or upgrades that may impact the operation of the company system by providing information and technical knowledge for a successful implementation.
• Work with the facility (customer) to schedule appropriate downtime for preventive and corrective maintenance.
• Provide a summary of work performed at the frequency and detail required by the facility to document the servicing of the system.
• Preplanned service calls outside of normal business hours may be required to accommodate user schedules, ex: preventative maintenance may be conducted during the evening. In order to be successful in this role, you should have at least 5 years’ experience in the troubleshooting, maintenance and repair of Electronic / Electrical and computerized electro-mechanical systems such as robotics, conveyors, sensors and PLCs (specifically RS Logic).

Must-Have Skills, and Experience:

• A good mechanical aptitude is desired, as is some level of expertise with computers (software, remote diagnostics, windows-based networking etc).
• Must be service-minded and customer-focused.
  

Description

The company provides top of the line, full and partial automation solutions for both direct mail and retail pharmacies. The OptiFill and RIVA service groups provide support and expertise to the customers on company equipment and product lines. Field Service Representative(s) will be primarily responsible for providing Level 2 technical support to customers and third-party Level 1 support vendors, along with managing and maintaining the relationship with the customers on behalf of the company.

• Focus on customer needs and satisfaction by troubleshooting, installation, validation, maintenance and service repair needs on pharmacy automated equipment.
• Perform 2nd Level hardware preventive and corrective maintenance, as well as some software maintenance.
• Schedule 1st Level (3rd party) resources, including preventative maintenance and service calls.
• Monitor and support 1st Level (3rd party) resources to complete emergency break fix service calls.
• Support the facility group with any enhancements or upgrades that may impact the operation of the company system by providing information and technical knowledge for a successful implementation.
• Work with the facility (customer) to schedule appropriate downtime for preventive and corrective maintenance.
• Provide a summary of work performed at the frequency and detail required by the facility to document the servicing of the system.
• Preplanned service calls outside of normal business hours may be required to accommodate user schedules, ex: preventative maintenance may be conducted during the evening. In order to be successful in this role, you should have at least 5 years’ experience in the troubleshooting, maintenance and repair of Electronic / Electrical and computerized electro-mechanical systems such as robotics, conveyors, sensors and PLCs (specifically RS Logic).

Must-Have Skills, and Experience:

• A good mechanical aptitude is desired, as is some level of expertise with computers (software, remote diagnostics, windows-based networking etc).
• Must be service-minded and customer-focused.
  

Description

• Location: Remote – Candidates must reside east of the Rocky Mountains and within 1 hour of a major airport.
• Excludes residents of TX, OK, LA, MS, and AL.
• Schedule: Monday–Friday travel, home most weekends
• Compensation: $75,000–$85,000 base + estimated 500 hours of overtime annually
• Travel: Up to 80% (Monday–Friday travel), with occasional weekend work for key projects

• Minimum of 4 years of experience in a related field, preferably with hands-on experience in testing, installation, and maintenance of DC power systems and large stationary batteries used in Uninterruptible Power Systems (UPS), ranging from 24VDC to 600VDC.
• Prior military experience as an Electronics Technician (ET) or Fire Controlman (FC) is highly valued, particularly with a strong background in Radar and UPS systems.
• Strong understanding of electrical schematics, troubleshooting procedures, and safety protocols related to high-voltage DC systems.

Description

• We align with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.
• Inspect building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.
• Perform contracted work which includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.
• Review assigned work orders. We estimate time and materials needed to complete repair. Orders' materials and supplies to finish the tasks.
• Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum and maintains the building lighting system, including element and ballast repairs or replacements.

• High school diploma or general education degree (GED) and a minimum of four years of related experience and/or trade school training!
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Universal CFC certification preferred. Additional certification in one or more of the following: electrical, mechanical, HVAC and refrigeration systems, process controls, mechanical power transmissions, painting, plumbing, carpentry or engine repair. Certifications/licenses as may be required by local or state jurisdictions.
• Ability to comprehend and interpret instructions and memos and ask clarifying questions to ensure understanding. Ability to efficiently present information to an internal department and/or large groups of employees.
• Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.
• Physical requirements include stooping, standing, walking, climbing stairs/ladders and ability to lift/carry heavy loads of 50 lbs. or more.

• Military technician experience
  

Description

Key Responsibilities Include:

• Inspect, install, maintain, and repair analytical instruments at customer locations
  • ~70% planned/predictive maintenance (rollers, belts, basic electronics, etc.)
  • ~30% equipment installations and emergency repairs
• Train customers on software applications and proper equipment operation and maintenance
• Provide phone-based technical support and recommendations
• Complete, document, and close customer service work orders accurately
• Partner with sales and account representatives to support customer growth and service opportunities

• Strong electronics troubleshooting and problem-solving skills with some mechanical aptitude
• Self-motivated and able to work independently in a remote, field-based role
• Excellent professional customer service and communication skills
• Ability to use hand tools, digital equipment, and read blueprints/schematics
• Strong verbal and written communication, planning, and organizational skills
• Clean driving record (no major violations in last 2 years; no DUIs in last 5 years)
• Credit sufficient to qualify for and maintain a company credit card

• Experience with X-ray systems, automation controls, or biomedical equipment
• Prior field service experience in regulated or production environments

Description

This position/program is a developmental project engineering role where you will need to thrive in ambiguity and use your leadership and relationship building skills to influence large multi-functional teams to solve technical, production, and logistics problems in the power generation industry. This role will report to the director of operations for Field Service North America and take supporting and lead roles in multiple concurrent service and strategic business projects and require little to no direct supervision; while learning the larger business and operation!

Specific functions will include:

• Coordinating large service and modification projects for power plants around the world.
• Leading multi-functional field and office teams through influence to complete short- and long-term improvement and business operations projects.
• Actively serve on power plant service outage projects as a field engineer.
• Create and execute business plans and presentations to senior internal and customer executives.

Must-Have Skills, Experience, and Education:

• Looking for O-3 and early O-4 Junior Military Officers with excellent leadership and a strong track record of success and results.
• Ability to form strong genuine relationships with coworkers and customers!
• Willingness and ability to travel frequently and operate independently of direct supervision.
  

What's Exciting About This Opportunity?

• Exciting informal Leadership Development Program to launch your career
• Excellent visibility for rapid career growth
• Fortune 50 Company
• Excellent Pay and Benefits
• Top company for Military Veteran hires!

• 4 weeks of paid vacation (PTO) to start, with 5 paid floater holidays pro-rated for the first year and 6 paid standard holidays. At the start of your third year, you get a 5th week of vacation.
• 100% match of 401K contribution, up to 6% (20% vesting of the matched amount each year).
• There are other perks like “be well” reimbursement of $300/year for health/fitness classes and related items.
• Perks: All Travel Rewards (Hotels & Flights), 4 months off a year, plus 20 days of PTO earned per year!

Description

Responsible for calibration, repair, modification, setup, and functional operation of Automatic Test Equipment (ATE), Measurement and Test Equipment (MTE), and peripherals. Includes reading and interpreting electronics/electrical schematics, mechanical drawings, and technical specifications which have been established by equipment manufacturers, engineers, or higher-grade technicians.

Must-Have Skills, Experience, and Education:

• Familiarity with measurement and test equipment i.e; oscilloscopes, digital multimeters, frequency counters, volt/ohmmeters etc.
• Good communication skills with ability to follow oral and written instructions.
• Knowledge of safe and proper working techniques.
• Associate of Science degree with an emphasis in electronics, or a combination of education and equivalent experience, or military experience with Electronic and Electrical capital equipment.

Description

In this role, you will perform installation and service work in a safe, efficient, and profitable manner while accurately tracking productive labor time versus travel time. You will complete preventive maintenance in accordance with customer-specific service programs and maintain detailed documentation of all work performed, including parts usage and service records. This position requires Stanley equipment updates and ANSI A156.10 standards, as well as keeping technical manuals and documentation up to date. You will be responsible for maintaining company vehicles, tools, and equipment in proper working conditions, managing service vehicle parts inventory, and ensuring all equipment is tested and safety-checked before leaving job sites. A professional appearance and high-quality workmanship are always expected, along with delivering excellent customer service and maintaining positive customer relationships. You may also assist with training and mentoring other technicians on installation and service methods.

Must-Have Skills, Experience, and Education

• High School Diploma or GED
• Valid, unrestricted state driver's license
• Strong verbal and written communication skills
• Ability to work independently in field-based environments
• Ability to lift 75–100 pounds
• Ability to sit while driving for extended periods (up to 2 hours or more)
• Ability to stand on concrete for extended periods (up to 8 hours)
• Ability to stoop, crouch, kneel, crawl, and twist as required
• Vision adequate for near, far, and color recognition
• Ability to work in various weather and climate conditions
• Flexible schedule with availability to work nights and/or weekends as needed

Nice-to-Have Skills

• Prior experience installing automatic door systems
• Construction experience installing door frames, windows, or glazing systems
• Background in electrical, automotive, or carpentry work
• Experience with databases or system configuration

Description

Description

The MEP Project Manager is responsible for managing, field inspections, problem solving, and coordinating all necessary Mechanical, Electrical, Plumbing and Fire Protection project resources and documentation throughout the entire project lifecycle. This includes the selection and management of MEP subcontractors, and the review, management, and administration of mechanical bid tabs/Exhibit Bs, MEP submittals, monthly MEP requisitions and change orders, and MEP contractor schedule/performance.

Location:

Remote - Southeast is ideal, close to Savanah is ideal for current project workload. Other preferred locations based on current projects (each project last 5-7 years) Include Charleston, Charlotte, Jacksonville, FL, Denver, Monroe, LA; Mobile, AL.

Description

Description

This is a highly technical, travel-intensive role supporting complex systems involving high voltage, RF/DC power supplies, vacuum systems, and precision measurement technology.

Location: Charlotte, NC or Atlanta, GA (within 1 hour of major airport)

• Perform installation, commissioning, maintenance, and repair of analytical instrumentation at customer sites
  
• Troubleshoot complex hardware and software issues
  
• Support high-voltage power supplies (RF, DC) and vacuum systems
  
• Conduct system testing to ensure operational quality and performance
  
• Provide customer training on equipment operation and maintenance
  
• Deliver remote technical support as needed
  
• Prepare accurate service reports and expense documentation
  
• Represent the company professionally to maintain high customer satisfaction

• Associate’s Degree in a technical field or equivalent hands-on experience
  
• Strong electronics troubleshooting skills
  
• Experience with high voltage systems (RF/DC power supplies)
  
• Understanding of vacuum systems
  
• Ability to travel 80%+ (Monday–Friday overnight travel)
  
• Valid driver’s license and ability to fly regularly
  
• Strong customer service and communication skills

• 5–7+ years of field service experience
  
• Experience servicing analytical instrumentation (OES, ICP, XRF)
  
• Background in physics or chemistry
  
• Military technical experience (electronics, avionics, radar, calibration, etc.)
  
• Experience working in laboratory or industrial manufacturing environments
  
• PLC troubleshooting exposure
  

Description

• Promoting and selling the full product line to all existing customers.
• Developing a key sales prospect list, establishing relationships, and selling new customers.
• Maintaining appropriate sales coverage in your territory.
• Delivering and maintaining appropriate levels of service, maintenance, and communications for 6 - 10 accounts within your area.
• Installing and programming chemical dosing equipment to interface with the customers' washing equipment.
• Leading the work of planning and executing new installations and/or conversions in your territory.
• Maintaining all company provided equipment in proper working condition.
• Operating within the assigned expense budget.
• Collection of past due accounts receivable, where applicable.
• Eliminating rush orders of products.
• Submitting all reports in a timely manner.

Must-Have Skills, Experience, and Education:

• Bachelor's Degree from four-year College/University in Business, Engineering, Mechanical, or related field and 1-2 years' industry related experience; or equivalent combination of education and experience.
• Excellent analytical, organizational, and technical/mechanical skills.
• Knowledge of Microsoft Office, including Word and Excel, Internet and Order processing software.
• Ability to act quickly, accurately and handle a fast-paced work environment.
• Good communication skills, written and verbal.

Description

• Read and understand the EPC Contract.
• Develop project procurement and delivery schedules.
• Manage weekly project team status review of procurement activities.
• Prepare and maintain project specific procurement templates, including RFP and contract documents.
• Develop technical and commercial expertise to enable proper management of procurement.
• Interface with engineering, accounting, scheduling, legal counsel, document control, field project team staff, and project management personnel.
• Review technical bid package and obtain scope and schedule clarifications as required for development of Request-for-Proposal (RFP) packages.
• Identify appropriate bidders for RFP packages.
• Prepare and issue RFP packages for subcontracts, purchase orders, rental agreements, and service agreements.
• Lead project team effort to respond in timely manner to bidder clarification requests.
• Expedite timely submittals of bids.
• Prepare commercial bid evaluation tabs and coordinate selection of “short-listed” bidders with engineering team.
• Negotiate terms and conditions as well as cost and schedule with suppliers, subcontractors, and vendors to achieve project needs.
• Select suppliers, obtain Project Management approval and award contracts.

• 4-year degree or equivalent work experience.
• Must have strong technical aptitude and ability to fully understand the technical aspects of the materials and equipment within the company scope.
• Must be able to understand contractual requirements, negotiate with suppliers and subcontractors, and coordinate with legal and accounting when required.
• Strong problem-solving skills to enable leading resolution of non-conformances and dispute issues.
• Proficient in P.C. skills, including Excel, Word, and Adobe.
• Must be able to communicate effectively in both verbal and written communication.
• Must be willing to travel to Project jobsites and suppliers approximately 10% of annual work schedule.

• Technical military experience

Description

Description

About the Role

RIX Industries is seeking a highly analytical and detail-oriented IT Data Analyst to transform complex manufacturing and operational data into actionable business intelligence that drives performance, efficiency, and strategic decision-making.

In this role, you will serve as a key partner to production, engineering, quality, supply chain, and IT teams. You will develop reporting solutions, build dashboards, support ERP and MES systems, and provide insights that improve operational performance across mission-critical applications in Marine, Aerospace, Energy, Industrial, Medical, and Critical Infrastructure markets.

This position is ideal for a data professional who thrives in a manufacturing environment, enjoys solving operational challenges through analytics, and can translate complex datasets into clear, actionable insights for technical and non-technical stakeholders alike.

What You'll Do

• Analyze manufacturing data (production, downtime, scrap, throughput, yield, inventory) to identify trends, risks, and improvement opportunities
• Translate raw data into actionable insights to support quality control, operational efficiency, and strategic decision-making
• Develop, maintain, and automate recurring dashboards and reports using Power BI, Excel, or similar tools
• Support KPI tracking, including OEE, yield, downtime, cost efficiency, and production performance metrics
• Extract and analyze data from ERP systems (Infor CSI/Syteline, SAP, Oracle) and MES platforms for scheduled and ad hoc reporting
• Collaborate with IT and software developers to support and maintain .NET-based reporting systems, integrations, and workflows
• Conduct root cause analysis using historical and real-time data to support continuous improvement initiatives
• Ensure data accuracy, integrity, governance, and consistency across reporting platforms
• Create clear, concise written summaries and visualizations that communicate insights to leadership and operational teams
• Provide training and documentation to non-technical users to support adoption of dashboards and reporting tools
• Perform additional duties in support of RIX's operational excellence and digital transformation initiatives

Must-Have Skills and Experience

• Bachelor's degree in Data Science, Industrial Engineering, Computer Science, Statistics, or related field
• 2+ years of experience in data analysis, business intelligence, or reporting within a manufacturing or operational environment
• Strong SQL skills for querying ERP, MES, and production databases
• Proficiency with Power BI, Tableau, or similar data visualization platforms
• Advanced Microsoft Excel skills (pivot tables, lookups, macros, modeling)
• Experience extracting, cleaning, and structuring data from APIs, cloud platforms (Azure, AWS), or flat files
• Working knowledge of manufacturing ERP systems (Infor CSI/Syteline, SAP, Oracle)
• Strong analytical, problem-solving, and critical thinking capabilities
• Ability to communicate technical findings clearly to non-technical stakeholders
• Highly organized, self-directed, and comfortable managing multiple priorities
• U.S. Citizenship
• Physical Requirements:
  • Ability to stoop, kneel, crouch, bend, stretch, and reach
  • Ability to lift up to 50 pounds regularly
  • Ability to sit or stand for extended periods

Nice-to-Have Skills

• Experience in manufacturing or industrial production environments
• Background supporting .NET-based applications or custom reporting integrations
• Experience with Infor CSI/Syteline, Data Lake environments, or Birst
• Experience with software testing and writing validation or test reports
• Exposure to continuous improvement methodologies (Lean, Six Sigm

Who You Are

• A data-driven problem solver who enjoys uncovering insights that improve operational performance
• Detail-oriented and committed to data accuracy and integrity
• Comfortable working cross-functionally across production, engineering, quality, and IT teams
• Skilled at translating complex datasets into clear, actionable business recommendations
• Motivated by continuous improvement and operational excellence

Additional Details

• Base Salary Range: $80,000 – $120,000
• Work Style: Onsite (Benicia, CA or Sparks, NV)
• Work Environment: Office-based with interaction around machine tools and testing equipment
• PTO and 12 Paid Holidays
• Retirement 401(K) with company match
• Medical, Dental, and Vision insurance
• Group Term Life Insurance
• Tuition Reimbursement Program
• Referral Bonuses and more

Description

Description

Machine Shop Supervisor - 2nd Shift

Location: York, PA – In Person

Employment Type: Full-Time

About the Role

Precision Custom Components (PCC) is a leading U.S. manufacturer of energy-related equipment, serving government, defense, nuclear, and commercial clients, including the Departments of Energy, Defense, NASA, and Naval shipyards. PCC is seeking a 2nd Shift Machine Shop Supervisor to lead the machining department, supervise hourly associates, and ensure production meets quality, budget, and scheduling requirements.

This role is ideal for an experienced supervisor who enjoys managing a team in a manufacturing environment, optimizing processes, and ensuring high-quality, compliant production outcomes.

What You'll Do

• Supervise and train the machining department workforce
• Plan, coordinate, and direct daily manufacturing and quality assurance activities
• Ensure production meets contractual, quality, and safety standards
• Read and interpret blueprints and GD&T for manufacturability and inspection
• Utilize ERP and Microsoft Office applications to track production, schedules, and reports
• Foster positive supervisor-employee relationships in a collective bargaining environment
• Identify process improvements and implement efficiency initiatives

Must-Have Skills and Experience

• High school diploma or trade school equivalent (apprenticeship or post-secondary education preferred)
• 3-5 years of manufacturing experience, preferably in a similar environment
• Verifiable supervisory experience in a machining or manufacturing setting
• Strong computer skills, including ERP systems and Microsoft Office (Word, Excel, Outlook)
• Blueprint reading and GD&T knowledge
• U.S. citizenship at time of hire

Nice-to-Have Skills

• Prior experience in defense, nuclear, or government-related manufacturing
• Familiarity with shift scheduling and collective bargaining unit management
• Exposure to tooling, fixtures, and material handling equipment

Who You Are

• Self-starter with strong leadership and people-management skills
• Detail-oriented, organized, and able to work independently
• Comfortable supervising a unionized team and maintaining compliance standards
• Able to mentor and guide associates while fostering a positive work culture

Additional Details

• Salary Range: $70,000 – $80,000 per year + 10% 2nd shift differential
• Work Location: On-site (In Person)
• Benefits: 401(k) matching, medical, dental, vision, life and disability insurance, paid time off, flexible spending account, flexible schedule with 1 day off every 2 weeks, employee assistance program, referral program

Description

Production Planner

Location: Florence, NJ

Employment Type: Full-Time

About the Role

DC Fabricators, Inc. is a leader in the manufacturing of specialized heat exchangers and steam condensers supporting critical U.S. Navy defense programs. Our success is driven by precision planning, operational excellence, and close coordination across engineering, manufacturing, and supply chain teams.

We are seeking a detail-oriented Production Planner to join our Florence, NJ facility. This role is critical to coordinating production schedules, tracking shop floor progress, and ensuring timely delivery of high-quality components that meet strict military and customer requirements.

What You'll Do

• Track the progress of manufactured products through the shop floor
• Interface with all departments to ensure materials, parts, and services are delivered on time and aligned with production schedules
• Coordinate resolution of workstation loading conflicts, including movement of materials, parts, and tooling
• Manage movement of parts and materials into and out of storage
• Collaborate with production supervisors and manufacturing engineers on material availability, special handling, and schedule changes
• Anticipate potential schedule delays and take proactive action to prevent impact
• Expedite materials, parts, and tooling to maintain production schedules
• Review travelers for completeness and identify open operations
• Review bills of material (BOMs) and classify material sourcing (stock vs. purchased raw or finished material)
• Assist with make-or-buy decisions
• Distribute and maintain controlled shop documents, including drawings and procedures
• Perform inventory transactions within the ERP system (issuing parts, closing jobs, etc.)
• Communicate production priorities to support manpower planning and allocation

Must-Have Skills and Experience

• Associate degree in Business, Engineering, or equivalent experience (apprenticeship completion desirable)
• 0-2 years of experience in a similar manufacturing environment (4-6 years preferred)
• Strong working knowledge of ERP systems
• Proficiency with Microsoft Word, Excel, and Outlook
• Ability to analyze production control issues and implement corrective actions
• Strong attention to detail and organizational skills
• Effective written and verbal communication skills

Nice-to-Have Skills

• Experience supporting defense, military, or government manufacturing programs
• Familiarity with shop floor operations and manufacturing workflows
• Exposure to make/buy analysis and inventory management
• Experience working in heavy industrial or fabrication environments

Who You Are

• Highly detail-oriented and organized
• Proactive in identifying and resolving scheduling or material risks
• Comfortable coordinating across multiple departments
• Able to handle complex assignments with minimal supervision
• Tactful and professional in cross-functional interactions

Additional Details

• Salary: $52,000 – $65,000 per year
• Job Type: Full-time | On-site | Monday-Friday, Day Shift (8 hours)

Benefits Include:

• 401(k) with matching
• Health, dental, and vision insurance
• Life insurance
• Paid time off
• Tuition reimbursement
• Flexible schedule & spending accounts
• Employee assistance program

Description

Project Engineer

Description

Quality Inspector - 2nd Shift

Location: York, PA

Employment Type: Full-Time

About the Role

PRECISION CUSTOM COMPONENTS, LLC (PCC) is seeking a 2nd Shift Quality Inspector to join our skilled manufacturing team. PCC, based in York, PA, has over 100 years of experience manufacturing energy-related equipment for government, commercial, and industrial customers. Today, PCC is a leading domestic supplier to the Commercial Nuclear Industry, Departments of Energy and Defense, NASA, Naval Shipyards, and other industrial/government clients.

This role is hands-on and inspection-focused, utilizing conventional measuring tools, machine indicators, and advanced measurement technology (Laser Tracker, Faro Arm, Photogrammetry) to ensure compliance with engineering drawings and specifications.

What You'll Do

• Dimensionally inspect components using conventional measuring equipment, machine indicators, and Laser Tracker/Faro Arm/Photogrammetry technology.
• Interpret engineering drawings and planning documents for accurate inspection.
• Identify common ASME Y14.5 symbols and terms: datums, basic dimensions, tolerance zones, MMC/LMC, RFS.
• Read simple feature control frames (FCFs) and understand requirements.
• Recognize and interpret basic controls including true position, flatness, perpendicularity, parallelism, cylindricity, and profile.
• Apply datum references (A|B|C) in inspection activities.
• Maintain inspection records and document findings according to company and customer standards.
• Ensure compliance with safety, quality, and regulatory standards.

Must-Have Skills and Experience

• 3-5 years industrial experience as a journeyman machinist or machine operator.
• 3+ years industrial experience as a quality control inspector.
• Strong 3-dimensional thinking and geometric reasoning skills.
• Minimum 1-year experience with GD&T (Geometric Dimensioning & Tolerancing).
• Minimum 1-year experience reading and interpreting engineering drawings.
• Basic computer skills, including Microsoft Office (Word, Excel, Outlook).
• US Citizenship required at time of hire.

Nice-to-Have Skills

• Additional experience reading and interpreting complex engineering drawings.
• Exposure to Laser Tracker/Faro Arm/Photogrammetry technology.
• Familiarity with ASME standards in nuclear, defense, or industrial environments.

Who You Are

• Detail-oriented and meticulous in inspection work.
• Team player who can also work independently on a 2nd shift schedule.
• Comfortable working with advanced measuring technology and following precise engineering standards.

Additional Details

• Salary: $32.94/hour + $2.00/hour 2nd shift differential
• Job Type: Full-time | On-site | 2nd Shift, Full-time, On-site
• Benefits Include:
  • 401(k) with matching
  • Health, dental, and vision insurance
  • Life insurance
  • Paid time off
  • Tuition reimbursement
  • Flexible schedule & spending accounts
  • Employee assistance program
  • Referral program