STRAC Institute Graduate Job Seekers

Job Description

Go to end  ⇓
Position Details:

Title: Director of Global Sourcing
Location: Brooklyn, NY or Deer Park, NY
Schedule: M-F Days – eventual Hybrid work schedule with 2-3 days/week in office.
Compensation: $180,000 - $200,000 base salary, depending on experience, plus STIP Bonus and LTIP Bonus
Benefits: Comprehensive corporate benefits includes Medical, Dental, Vision and Life Insurance, Short and Long-term Disability Insurance, Flexible Spending Plans, 401(k) after 60 days of service with 50% company match on first 8% after 1 year of service, Profit Sharing Plan after 1 year of service, PTO and Paid Holidays.
Travel: Domestic and international - to suppliers, company facilities, tradeshows, etc. - up to 25%.
Vaccine Requirement: No corporate vaccination policy.

Position Description:

Reporting to the Head of Global Supply Chain Management, the Director of Global Supply Chain Planning & Analysis will provide strategic and tactical leadership to a global team ensuring all operational and financial objectives are met while fostering a culture of collaboration, quality, and continuous improvement to support the company’s commitment to meet customer requirements and exceed their expectations. You will be responsible for developing and executing a Global Supply Chain Planning vision and strategy. This strategy will encompass best practices across the demand and supply planning operations on a global scale, with a primary focus on exceeding customer service levels, optimizing working capital, improving forecast accuracy, and enhancing profitability.

Responsibilities include:

Recruit, retain, and continually develop a high-performing global team of 15-20 supply chain professionals.
Lead the Sales and Operations Planning (S&OP) process, fostering collaboration to drive consensus/decisions
Plan and drive improvement initiatives to continuously enhance the capabilities, efficiency, cost-effectiveness, and responsiveness of the Planning department globally.
Develop and execute demand forecasting strategies and processes to accurately predict product demand, optimize finished goods (FG) inventory levels, and minimize stock-outs.
Collaborate with cross-functional teams to ensure accurate demand planning, inventory control, and replenishment strategies, taking into account varying market dynamics and customer preferences.
Drive the cross-functional review process to regularly evaluate and disposition FG’s for potential life cycle progression to minimize the impact of FG obsolescence on inventory and financial performance.
Develop and execute supply planning strategies and processes which effectively balance customer demand, inventory productivity, and operational efficiency.
Collaborate with Sourcing, Quality, Sales, and Operations to deliver required service levels, targeted inventory levels, and other key operational objectives, considering demand inputs, customer / NPI requirements, and manufacturing and supply constraints.
Optimize inventory levels to minimize excess and obsolete inventory while ensuring timely customer order fulfillment and minimizing backorders.
Develop and maintain robust analytical models and tools to analyze global supply chain data, identify trends, and provide actionable insights.
Utilize statistical methods, data visualization, and other advanced techniques, to evaluate global supply chain performance and support decision making at strategic and tactical levels.
Proactively identify and quantify potential global supply chain risks and vulnerabilities.
Develop and implement risk mitigation strategies, contingency plans, and business continuity measures to ensure uninterrupted supply chain operations that support customer service level objectives.
Foster strong relationships with internal and external stakeholders.
Collaborate with x-functional teams globally to streamline processes and enhance overall SC performance.
Establish key performance indicators (KPIs) and metrics to monitor supply chain performance.
Regularly evaluate performance against targets, conduct root cause analysis, and implement corrective actions as necessary to ensure annual objectives are being met.
Provide regular and ad hoc reporting to management on key objectives, initiatives, supply chain metrics / KPI’s, and other areas as required.
Communicate/drive strategic plan/goals/objectives and KPI’s across team - ensure alignment/understanding
Regularly review and assess performance metrics of the team against targeted objectives - take proactive measures to ensure department and organizational goals are achieved.
Build organizational capabilities and improve performance through personnel development plans, mentoring, cross-training and succession planning.
Foster a culture of innovation, collaboration, continuous learning, accountability, and a sense of urgency within the team and its processes.
Ensure compliance with relevant policies, procedures, and regulations, promoting a strong ethical and responsible approach to supply chain planning and analysis.

Requirements:

Bachelor's Degree in Supply Chain, Business, Materials Management, Engineering or similar field.
10+ years’ experience in supply chain planning & analysis, forecasting, operations, and/or supply management.
5+ years directly leading demand and/or supply planning within a manufacturing environment.
Experience in an electrical/electronics manufacturing environment - RF/Microwave and ICs preferred.
Excellent leadership and people management skills with ability to inspire and retain a diverse global team.
Demonstrated track record of driving process improvements, working capital optimizations, and operational efficiencies in a global supply chain environment. 
Extensive knowledge of global supply chain management principles, including demand forecasting, production scheduling, inventory optimization, logistics, and sourcing.
Ability to evaluate information, analyze complex data, derive actionable insights, and make decisions with minimal guidance while exercising discretion and flexibility to changing priorities.
Collaboration, continuous improvement and customer focus with a bias to over-communicate.
Thorough understanding of financial drivers and their impact on the financial performance of supply chain operations (e.g., turns, COGS, gross margin, forecast accuracy, etc.).
Experience driving transformational change through people, processes, and technology is a strong plus.
Familiarity with Sales & Operations Planning processes and data requirements is preferred.
Ability to influence using data, risk/benefit analysis, communication/relationships and building trust.
Proficiency in Microsoft Office Suite Products (Excel, PowerPoint, Word, etc.).
Professional certification in supply chain, such as CPIM, CSCP, CPSM or equivalent is desired.

Company Description:

Our client designs, manufactures and distributes complex electronics that are used in a range of wired and wireless communications applications.

Why this opportunity?:

Our client is experiencing steady growth with an emphasis on New Product Introduction, continuous improvement and customer service. Over the past 2 years, they have been transforming their Supply Chain Organization to best service their clients and this growth. As a company, they have a strong entrepreneurial culture, with an emphasis on communication and collaboration, and they reward their employees for individual and team success.

They are looking for a strategic, results-driven leader who possesses a comprehensive understanding of supply chain planning and analytics, coupled with strong leadership skills and a strategic mindset who can drive the organization towards operational excellence, working capital optimization, and supply chain resilience while fostering a culture of continuous improvement, collaboration, and accountability. Beyond experience, if you have the character, integrity and entrepreneurial spirit to anticipate needs/problems and proactively drive solutions, and are looking for a rewarding long-term career, you can make a direct positive impact at Mini-Circuits!

Job Description

Go to end  ⇓
Position Details:

• Title: Maintenance Technician
• Location: Greendale, IN
• Shift: 4 positions available
• 1 on 1st shift: 6:30a – 3:30p EST
• 2 on 2nd shift: 3:00p – 11:30p EST
• 1 on 3rd shift: 10:30p – 7:30a EST

• Travel: None
• Compensation: $23.05 or $28.55 depending on experience
• Benefits: Full benefits package with no eligibility waiting period
• Vaccine Requirement: None

Veteran Profile: Must have industry experience working on the electrical of industrial equipment. Mechanical aptitude or experience is also welcomed but 70% of the work will be electrical so that experience troubleshooting, repairing, and PM’s is necessary.

Position Description:
The Maintenance Technician is responsible for the scheduled, unscheduled and preventative maintenance and repair of a wide variety of beverage manufacturing and packing equipment requiring strong mechanical skills base to include: hydraulics, pneumatics, electrical, conveyor systems and PLC usage.

Responsibilities:
• Report problems with the FSMS to responsible managerial employees to initiate corrective actions
• Ability to perform a complete line changeover, including the filler, seamer, crowner, cappers, et c. and adjust all equipment to specified tolerances without instruction.
• Able to troubleshoot machinery for malfunctions (electrical, hydraulic, mechanical, & pneumatic) without instructions.
• Able to perform preventive and repair maintenance on all line and processing machinery without instructions to include lubrication, and heat/vibration analysis.
• Able to perform maintenance on all production supporting equipment (i.e. glycol system, RO system, Compressed Air system, lubrication systems, chemical distribution systems) without instructions.
• Able to use both the lathe and the mill to perform parts machining to specified tolerances without instruction.
• Able to weld (Arc, TiG, and MiG) as required.
• Able to troubleshoot parameter issues within a PLC not to include PLC programming
• Able to think outside the box when troubleshooting equipment in order to minimize production downtime, assure food safety, product quality and personnel safety (not in any particular order of importance or relevance).
• Complete, document, and retrieve final approvals on all assigned work orders to include recording all utilized part numbers for inventory purposes.
• Communicate effectively and completely all relevant maintenance and production related information from shift to relieving shift.
• Minimize downtime and improve efficiency.
• Assist in training other maintenance personnel.
• Communicate with production during periods of downtime.
Requirements:
• Three plus years’ experience in industrial manufacturing maintenance.
• Electrical/Electronic troubleshooting and repair skills.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.
• Microsoft Office capabilities (Outlook, Word, Excel).

Job Description

Go to end  ⇓
Position Details:

• Title: PLC Technician
• Location: Wilson, NC
• Shift: Continental Shift 6PM-6/6:30AM
• Compensation: $32/hr - $35/hr
• Benefits: Full benefits package with no eligibility waiting period
• Vaccine Requirement: None

Position Description:
• Responsible for the scheduled, unscheduled and preventative maintenance and repair of a wide variety of beverage manufacturing and packaging equipment requiring a strong mechanical skills base to include: hydraulics, pneumatics, electrical, conveyor systems and PLC usage.
• Work on beverage filling and packaging equipment primarily run with Allen Bradley PLC’s.
• Supporting the production and maintenance Team, making any needed changes to plc programs for line capability improvement, Projects related to updates of HMI’s, PLC’s etc.

Requirements:
• Three plus years’ experience in industrial manufacturing maintenance.
• Must have experience programming PLC’s and tracing wires on equipment.
• Electrical/Electronic troubleshooting and repair skills.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.
• Microsoft Office capabilities (Outlook, Word, Excel).

Job Description

Go to end  ⇓
Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military and civilian professionals for Equipment Maintenance Technician positions with an U.S.-based technology foundry specializing in the development and manufacturing of a wide variety of semiconductor-based solutions.

Position Details: Equipment Maintenance Technician
Location: Bloomington, MN

? Shift: 12-hour shifts on a 3-4 weekly shift schedule where you’ll work 3 days one week and 4 the next. There are openings on all shifts:
A-Shift = Sunday through Tuesday, and every other Wednesday (6am – 6pm) / No Shift Differential
B-Shift = Sunday through Tuesday, and every other Wednesday (6pm – 6am) / 10% Shift Differential
C-Shift = Every other Wednesday, and Thursday through Saturday (6am – 6pm) / No Shift Differential
D-Shift = Every other Wednesday, and Thursday through Saturday (6pm – 6am) / 25% Shift Differential

Compensation: Expected First Year Comp = $71.6k – 152.6k
Base Payrate ($28 – 45/hr) $58,240 – 93,600
Built In OT (8 hrs every 2 weeks) $8,736 – 28,080
Bonus Plan (8% target) $4,659 – 7,488
Shift Differential (0 – 25%) $0 – 23,400 .
Total $71,635 – 152,568
'Benefits: Technology offers competitive pay, a comprehensive benefits package including benefit eligibility on day one. Benefits include Medical, Dental, Vision, matching 401K, Disability Insurance Options, paid time off, paid holidays, and so much more.
Travel: N/A
COVID Vaccination: Not Required

Position Description:
In this position, you will perform preventive maintenance procedures on highly specialized manufacturing equipment. Depending on skill level you will also complete equipment repairs and equipment installations according to specifications in a particular area.
• High attention to detail is a must. You will also support site goals by maintaining the equipment to optimal performance.
• Success is determined by the best efforts of every team member.
• They reward your efforts by providing the tools you need to succeed, excellent opportunities for learning and career advancement, very competitive salaries, and comprehensive benefits.

Requirements:
Company is looking for experienced and competent technicians with strong electronic and mechanical troubleshooting abilities, with 2+ years of experience working in the semiconductor manufacturing industry. Specifically, candidates must possess:
• High attention to detail.
• Strong communication and organizational skills.
• Skills to work independently, under minimal supervision, to find short-term solutions.
• Ability to work independently, proficiency with PC hardware.
• Excellent physical requirements, which include manual dexterity, good hand-eye coordination, able to lift (a minimum of 30 lbs), bend, and reach.
• Ability to analyze a wide variety of equipment, troubleshooting problems, and make appropriate repairs.
• Ability to communicate and work effectively with interdepartmental groups.
• Ability to work well in a diverse team environment.
• Comfortable in providing training and writing procedures.
• Experience working with Applied Materials 5200 Centura, Endura, MirraTrak Gasonics Aura 3000, Iridia, or PEP ashers Novellus Altus W, 350, 400, HDP PSG and STI systems Semitool Solvent Tool Akrion Gama Wet Bench Axcelis Implant Lam 9600, 9400, or Versys Westech 472 is a plus.
• Military candidates highly preferred!

Job Description

Go to end  ⇓
Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals for an Aircraft Mechanic position with the leading provider of MRO and Aviation Line Maintenance Services throughout the United States and Internationally

Position Details:
Title: Aircraft Mechanic (with or without existing A&P license)
Location: Anchorage, AK
Training Program: Formal training curriculum and OJT, For non- A&P license holders- Formal training curriculum and OJT focused on A&P license
Shift: 4 days on, 3 days off – 10-hour work day
Compensation: $30 - $50/hour depending on experience. For A&P license holders, $12k retention bonus paid out over 2 years, + $2k in relocation assistance (outside 50 mile radius).
Benefits: Offers a comprehensive benefits package including Medical, Dental, Vision, 401k match, Life and Disability Insurance, as well as generous PTO and paid holidays.
Travel: No travel required.

Position Description | Aircraft Mechanic
• Perform Line maintenance (on-call and scheduled) work on various customers' aircraft.
• Perform routine maintenance and airworthiness releases (within the scope of approval) returning aircraft to service.
• Responsible for servicing, inspecting, and maintaining aircraft, aircraft engines, and associated components.
• Troubleshoot systems; disassemble, repair, and reassemble sections and components to maintain fully functioning equipment according to Approved Technical Data provided by the customer.
• Ensure all departing aircraft are safe in accordance with FARs and the air carrier/manufacturer manuals and all work performed is properly documented.
• Perform line maintenance duties, activities, and maintenance tasks as assigned.
• Collaborate and communicate with the air carrier’s maintenance control center as required.

Requirements:
• Must have a current valid FAA Airframe & Powerplant License or Must have a current 8610-2 certification if working to obtain A&P license.
• Must have a valid driver’s license.
• Ability to frequently stand, walk, continually utilize hand, and finger dexterity, climb, balance, bend, or crawl, occasionally from heights in precarious places.
• Ability to frequently lift/push/carry items up to 50 pounds. Have the awareness that he/she will be working near and around moving mechanical parts, around fumes, airborne particles, or toxic chemicals and exposure to loud noises.
• Utilize visual acuity to operate equipment and read technical information.
• Be exposed to weather conditions outside as well as non-weather conditions such as extreme heat or cold.
• Must be able to read and write English.
• Must pass airport security background checks and travel for work as required.
• Must be willing to work flexible shifts to include nights and weekends to meet customer demand.
• Preferred qualifications: Aircraft technician with B747-400, B747-800, B767, B777 experience.

Job Description

Go to end  ⇓
Title: Maintenance Technician
Location: Bridgeton NJ
Shifts: Must be flexible for rotating swing shift work: Swing = covers all shifts on a rotating basis
1st = 8a-4p |2nd = 4p-12a | 3rd = 12a-8a
You will train on the first shift for about 3 months then either put on a swing, 2nd or 3rd shift.
Their days worked will be like this: 7on 1off; 7on 2off; 7on 4 off.
Compensation: $36.01 + OT + Shift Differential ($1.00 for 2nd / $1.50 for 3rd)
Benefits: Full Comprehensive Benefits Package
Travel: No travel

Position Description: Perform corrective, preventative, and predictive maintenance on production-related equipment.

• Establish and maintain a safe environment with good housekeeping that ensures constant awareness and always strives for zero accidents.
• We are seeking a candidate who has the mechanical and electrical aptitude and experience of working directly with production equipment i.e., conveyors, sprays, ovens, and printers.
• Understands the importance of proper and timely maintenance of machinery and equipment.
• Set up adjust maintain and operate various support equipment. The tech has primary responsibility for the production and quality of assigned equipment.
• Able to analyze all types of mechanical, electrical, or operational issues.
• Make necessary corrections and running adjustments to maintain maximum production.
• Constant checking of machines and vigilance of daily operation.
• Analyze by plant/item/shop as needed to focus improvement efforts.
• Communicate the quality vision and expectations.

Requirements:
• Solid mechanical and electrical aptitude and good problem-solving skills.
• Ability to read mechanical and electrical schematics.
• Must have 480v industrial electrical experience.

Job Description

Go to end  ⇓
Position Details:
• Title: Equipment Service Technician
• Locations:
o West Region (can live anywhere in the territory that includes CA, OR, WA, ID, NV, NM, AZ, UT, CO, WY, MT)
o Northeast Region (can live anywhere in the territory that includes ME, NH, VT, MA, RI, CT, NY, NJ, PA, DE, MD, WV, VA)

• Schedule/Travel: You will perform on-site technical services at customer sites throughout your assigned, multiple state territory (see highlighted regions on map above). You can expect ~80% overnight travel, sometimes for several weeks consecutively. When you aren’t travelling overnight, you will be providing technical service to customers in the local area.
• Compensation: Target base rate ~$65K-$70K (total earning potential ~$100K with overtime, triple-time and bonuses)
o Bonuses/Additional Compensation: $10K sign-on bonus; plenty of O/T and travel expenses reimbursed (company credit card); you will be provided a company car.
• Benefits: Company offers an excellent benefits package to include:
o Medical (Comprehensive PPO, two HRA Plans and an HSA plan)
o Dental (basic and comprehensive coverage)
o Vision (basic and premier coverage)
o Prescription drug coverage
o 401K with a 6% company match (Eligible to participate from day one (1) with 100 % vesting in all company provided funds immediately)
o New Hire Wellness Bonus (see plan details)
o Healthcare and Dependent day care flexible spending accounts
o Livongo diabetes program
o Corporate discounts
Position Description: In this role you will provide technical service and support for customers who own and operate Evergreen filling machines, to include installation, inspection, troubleshooting and service repair of electrical, mechanical and electro-mechanical systems and equipment. You will also train the customer’s personnel on proper operating and maintenance techniques to ensure good packing outputs. Some other specific responsibilities include:
• Conduct/control service activities as assigned to ensure timely customer support and safety are achieved while meeting the budgeted goals and objectives for productivity and utilization.
• Communicate well with central scheduling, management, other departments and customers.
• Function as the equipment service technician within the departmental advising EPE service management and/or engineering of any problems or situations with models of current or modified design.
• Provide learning experience for both customer and EPE plant personnel on machine operation.
• Learn and grow skill sets and competencies to achieve both business and personal development objectives.
In order to be successful in this role, you should have well-rounded troubleshooting and maintenance experience, ideally with industrial equipment, electrical, pneumatic and other related mechanical systems (pumps, valves, air cylinders, conveyors, etc). You should be able to interpret technical schematics and use electrical / electronic test equipment, too. You also must possess a valid driver’s license.

Job Description

Go to end  ⇓
Position Details:

Title: Manufacturing Equipment Technician
Location: Hudson, NH
Shift: Back End Day (BED) - 6am-6p Thur,Fri,Sat every other Wed
Compensation: $34.75/hr
Benefits: Benefits including but not limited to medical, dental, vision and many more!
Travel: No travel.
Vaccine Requirement: No Covid Vaccination Required.

Position Description:
The company is searching for an Equipment Maintenance Technician to support the Fabrication Department in our facility in Hudson, NH. Under minimal supervision, this person will be responsible for maintaining and troubleshooting a variety of manufacturing & fabrication equipment. The Equipment Maintenance Technician ensures equipment and systems are running efficiently and at optimal capacity to meet manufacturing & fabrication needs. This position will report to the Manager of Facilities. MUST HAVE STRONG ELECTRICAL TROUBLESHOOTING SKILLS.
• Performs hands-on preventative maintenance, troubleshooting, diagnosing, and repairing of industrial automated fabrication equipment on a daily basis.
• Documents routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool logbook
• Communicates issues with third party equipment vendors as needed to expedite troubleshooting and repairs
• Sustains and improves Preventative Maintenance Program on all fabrication/processing equipment.
• Authors accurate documentation for the operation and maintenance of various automated industrial equipment.
• Test, tune, and adjust equipment to obtain optimum operating performance.
• Report spare part requirements.
• Determines type of repairs to be performed, approves, and suggests modifications to equipment, and analyzes results to evaluate equipment performance.
• Develops or improves techniques to meet quality, function, and cost standards.
• Works with electrical systems and electronic components of complex industrial machinery and equipment, following manuals, schematic diagrams, blueprints, and other specifications
• Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.
• Ability to troubleshoot and follow through with repairs of manufacturing equipment and electronic controls.
• Responsible for performing scheduled and unscheduled preventative maintenance tasks using CMMS system.
• Responds to unplanned urgent needs in having equipment repairs performed minimizing down time.
• Utilized a variety of hand and power tools to construct, renovate and repair equipment.
• Contributes to team effort by accomplishing related duties as requested.
• Other duties as needed or assigned.


Requirements:
• High school diploma or GED.
• Minimum of 5+ years’ general equipment maintenance experience, with strong manufacturing background.
• Must have excellent mechanical and electrical aptitude.
• Understands electrical, mechanical, fluid power and controls systems.
• Must understand troubleshooting of Programmable logic controllers and their various control signals.
• Experience working with detailed work instructions, and reading & interpreting blueprints & drawings.
• Can analyze the problem, synthesize alternative solutions, and perform repairs.
• Strong computer skills, including MS Office applications (Word, Excel).
• ISO 9001 and ISO 16949 experience.
• Read and understand technical/repair manuals and vendor resources.
• Hands on maintenance experience with operating, repairing, and troubleshooting of electrical and mechanical manufacturing equipment
• Experience using electrical testing equipment and expert knowledge and use of power and hand tools.
• Ability to work in a complex environment with broadly defined parameters. Requires a high degree of judgment and initiative.
• Must be able to lift up to 50 lbs.
• Ability to stand and walk for 12-hour shifts.
• Ability to work with minimal supervision and adjust to rapidly changing priorities.?
Preferred:
• AA degree, Vocational High School Technical training or technical trade certificate is a plus.
• Knowledge of and ability to follow 5S methodology, LEAN a plus.
• Strong computer skills, including MES & SAP, preferred.

Job Description

Go to end  ⇓
Position Details:
Title: Quality Inspector
Location: Yankton, SD
Shift: Weekends 3 days on 4 days off - Friday 8 hours (6a-2:30p), Saturday and Sunday 12 hours (5a-5:30p)
Compensation: $18-$25/hour + OT
Benefits: Medical, Dental, Vision insurance / 401(K) / Holidays + PTO
Travel: None

Position Description: The Quality Inspector plays an essential role in our business verifying product conformance to the customers’ dimensional criteria. This position also interacts with our internal customers to provide guidance on external customers’ requirements. This individual is a proven performer with high attention to detail and possesses strong organizational skills while taking direction from several different functions.


Responsible for accurately and efficiently performing dimensional inspections of product to the internal and external customer specification using open setups, CMMs, and other measuring equipment
Interpret specifications and perform inspections based on those customer requirements/standard work within the given router times
Use inspection equipment in accordance to the training standard in order to provide accurate and consistent inspections
Responsible for assuring each step required in the inspection process is documented
Responsible for filling out nonconformance reports with specific details from the specifications including locations and paragraphs supporting the rejection and providing a clear description of the nonconformance
Responsible for providing accurate, repeatable, and consistent inspections with attention to detail and making sure the part(s) is acceptable per the customer specifications and drawings and that any rejections are supported by the specification, not opinion
Determine and take action on the steps to attain continuous improvement to inspection standard work and inspection methods
Must be able and willing to engage in various improvement activities on the plant floor and out of the office
Responsible for reviewing and completing quality validations and/or documentation

Requirements:

High school diploma or equivalent
Must have a practical understanding and proficiency in engineering drawing interpretation to include GD&T requirements
Must possess strong computer skills, with experience in Word, Excel, and other windows based software.
Must be able to accurately and efficiently generate instructions, reports, etc.
Strong reading, writing, problem solving, and analytical skills
The ability to teach and train others in a coach or mentor role as needed
Must be able to maintain confidentiality of customer and company information

Work Conditions: While performing the duties of this position, the employee will work in a manufacturing environment. The employee works near moving mechanical parts and in precarious places. This position is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock and vibration. This employee may be required to wear a supplied air hood or respirator. The noise level in the work environment is usually moderate.

 

Physical Requirements: While performing the duties of this job, the employee will stand, walk, use hands to finger, handle, feel or operate objects, tools or controls; the employee is required reach with hands and arms and may occasionally sit. This position requires the ability to regularly lift and move up to 10 pounds, frequently lift and move up to 30 pounds and occasionally lift and move up to 50 pounds.

Job Description

Go to end  ⇓
Position Details:

• Title: Field Service and Lab Engineer
• Location: Atlanta, GA
• Shift: Days (8:00am – 4:30pm EST)
• Compensation: $27-33hr+
• Benefits: 401K, MED, DEN, VIS plus more!
• Travel: 80%
• Relocation package: Case-by-Case

Position Description:
• Join our team in a multifaceted role with key responsibilities. Your focus will include installing advanced equipment, offering customer training, and collaborating with experts for successful installations. As a troubleshooter, you'll diagnose issues, address software complexities, engineer solutions, and conduct prompt repairs and preventative maintenance. Diligently, you'll maintain detailed work reports and provide expert advice to customers. Your professionalism will shine as our ambassador, upholding the highest standards during interactions. Your role will also encompass planning and documenting internal trial runs, configuring lab setups, and ensuring the excellence of our lab machines to advance our cutting-edge solutions continuously.

What you’ll be contributing:
• Install Equipment:
- Install equipment and provide training to customers on how to operate it.
- Communicate and cooperate with different subject matter experts to ensure a successful install.
• Troubleshoot & Repair Equipment:
- Troubleshoot equipment to determine the cause of reported problems.
- Analyze software problems
- Engineer solutions for special applications
- Once the problem is identified: repair the equipment to restore it to full functionality.
- Perform routine preventative maintenance.
• Maintain Work Reports:
- Write logs of every service call they perform and add notes to customer records.
• Advise Customers:
- Show customers how to use equipment and advise them on best practices to keep their equipment functioning well.
• Perform Demonstrations:
- Demonstrate equipment capabilities to customers and demonstrate how to perform various tasks, including simple maintenance.
• Maintain Appearances:
- Professional in work ethic and appearance.
- Represent company and must portray the highest professional image to customers.
• Trial Runs:
- Plan, execute, and document internal trial runs
- Design specific lab configurations
- Keep Lab machines in excellent technical conditions

Requirements:
• Mechanical Skills:
- Use their hands and various tools to install and repair equipment, as well as utilize basic mechanical principles to assist with the troubleshooting process.
• Electrical Skills:
- Use basic electrical principles to analyzing failures of electrical components and equipment based on symptom recognition.
- Able to read and interpret E-Plans.
- Repair and install all electrical components to retain full functionality.
• Customer Service:
- Interact with customers by helping them resolve equipment issues and telling them how to use newly installed equipment.
• Communication:
- Use verbal communication skills to speak with customers, listening to their concerns and asking questions when needed to determine the nature of their problems and equipment needs.
• Professional Flexibility:
- Must be willing, prepared, and able to visit customers on a moment’s basis in many cases including weekends when necessary.
- Being able and willing to travel internationally for installs to the extent of about 2 weeks.
• Analytical Thinking:
- Diagnose equipment problems and determine ways to fix these issues, which requires analytical skills.
• Computer Skills:
- Log information into digital work reports as well as navigate company programs that assist in troubleshooting all elements of machine equipment.
- Software and Controls experience
• Physical Fitness:
- Must be physically fit enough to lift and carry heavy equipment.
- They may also crouch or squat to work on equipment.

Job Description

Go to end  ⇓
Position Details:
• Title: Maintenance Technician
• Location: Norfolk, NE
• Shift: Day shift
• Travel: None
• Compensation: $28-$35/hr
o Bonuses/Additional Compensation: Overtime available
• Benefits: Medical, Dental, Vision. 401k.
• Vaccine Requirement: None

Position Description:
Successful candidates must have a wide range of experience in maintenance functions and duties. This position requires a highly organized; very hands-on person who leads by example and has a minimum of three years of experience. The successful candidate must ensure that all maintenance functions and duties are met or exceeded. The candidate must be a team player, have initiative, and require very little supervision.
• Must know how to and be capable of safely operating all plant repair tools.
• Must be able to communicate process variables to shift supervisors and maintenance team members.
• Must be team-oriented and able to interact with all levels of plant employees.
• Ability to work 40+ hours per week including weekends when necessary.
• Must be able to follow a preventative maintenance program throughout the plant.
• Must have skills to troubleshoot electrical, electronic, hydraulic, pneumatic, and mechanical problems at the plant in a highly effective and timely manner.
Requirements:
• Experience with Allen Bradley process controls/logic
• Knowledge of Hydraulic control systems
• Basic and advanced electrical, and electronic troubleshooting
• Basic welding/cutting operations.
• Basic technical drawing and the ability to read prints.
Preferred Skills:
• 2-4 years electro-mechanical experience
• Experience with manufacturing equipment or working in a manufacturing plant preferred.

Job Description

Go to end  ⇓
Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals for a Service Technician position with the nation’s leader in Renewable Natural Gas (RNG) production and distribution.

Position Details
Location: Tacoma, WA
Salary: $30-$35/hr with OT
Shift: M-F, 7:00am to 3:00pm. Overtime possible, not guaranteed.
Travel: Daily travel is required. Company truck provided with gas card.
Benefits: Medical, Dental, Vision, 401k (with match), Company Truck (take home), fuel card, boot allowance, Various Insurances (Life, A&D, Pet), PTO + Holidays
Equity: Employee Stock Purchase Plan

Position Description
As a Service Technician, you will be working an entry level service technician role at a national natural gas company. The company is changing the way the world fuels its vehicles by providing renewable natural gas for heavy duty trucks, buses, and other large vehicles. You will inspect, maintain, and perform minor to moderate repairs on CNG and/or LNG fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. Duties will include:
• Inspect, maintain, and adjust electrical equipment such as but not limited to electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
• Inspect, maintain, and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves, and actuators for safe and proper operating condition.

Position Requirements
• High School Diploma (preferred) or equivalent plus a minimum of 4 years of related or equivalent combination of education and experience.
• Working knowledge of Mechanical and Electrical systems. Must have basic computer knowledge, especially using service software.
• Strong working knowledge and be able to demonstrate ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits, and faulty relay logic, also should be able to monitor, check and correct phase imbalances, current draw, low voltage power supply’s, pressure transmitters, relay logic and programmable logic control operation.
• Strong working knowledge and be able to demonstrate the ability to diagnose and repair such mechanical problems as high- and low-pressure gas flow restrictions, interstage gas compressor temperatures and pressures, pressure regulator variance and should have a strong understanding and be able to monitor, interpret, check, and correct operational trends in reciprocating and screw type gas compressors.
• Must possess basic set of tools prior to first day, list provided in initial interview.

Job Description

Go to end  ⇓
Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals for a Service Technician position with the nation’s leader in Renewable Natural Gas (RNG) production and distribution.

Position Details
Location: Cleveland, OH
Salary: $28/hr with OT
Shift: M-F, 7:00am to 3:00pm. Overtime possible, not guaranteed.
Travel: Daily travel is required. Company truck provided with gas card.
Benefits: Medical, Dental, Vision, 401k (with match), Company Truck (take home), fuel card, boot allowance, Various Insurances (Life, A&D, Pet), PTO + Holidays
Equity: Employee Stock Purchase Plan

Position Description
As a Service Technician, you will be working an entry level service technician role at a national natural gas company. The company is changing the way the world fuels its vehicles by providing renewable natural gas for heavy duty trucks, buses, and other large vehicles. You will inspect, maintain, and perform minor to moderate repairs on CNG and/or LNG fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. Duties will include:
• Inspect, maintain, and adjust electrical equipment such as but not limited to electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
• Inspect, maintain, and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves, and actuators for safe and proper operating condition.

Position Requirements
• High School Diploma (preferred) or equivalent plus a minimum of 4 years of related or equivalent combination of education and experience.
• Working knowledge of Mechanical and Electrical systems. Must have basic computer knowledge, especially using service software.
• Strong working knowledge and be able to demonstrate ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits, and faulty relay logic, also should be able to monitor, check and correct phase imbalances, current draw, low voltage power supply’s, pressure transmitters, relay logic and programmable logic control operation.
• Strong working knowledge and be able to demonstrate the ability to diagnose and repair such mechanical problems as high- and low-pressure gas flow restrictions, interstage gas compressor temperatures and pressures, pressure regulator variance and should have a strong understanding and be able to monitor, interpret, check, and correct operational trends in reciprocating and screw type gas compressors.
• Must possess basic set of tools prior to first day, list provided in initial interview.

Job Description

Go to end  ⇓
Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals for the Continuous Improvement Engineer position with a leading manufacturer of precision machined and swaged components.

Position Details
Location: Yankton, SD
Compensation: $65,000 - $75,000
Shift: 1st Shift Monday – Friday (7am-3:30pm)
Travel: This position may require travel with overnight stays
Benefits: Medical, Dental, Vision insurance / 401(K) / Holidays + PTO

Position Description
As a Continuous Improvement Engineer, you will provide support to the organization in meeting overall goals and objectives as well as growing and developing the business. This position drives continuous improvement projects and supports developing a lean culture while meeting goals for safety, quality, delivery, and profitability. Additionally, you will support the CI Manager with strategic activities, developing and tracking improvement metrics, establishing standards across the company, and achieving operational excellence.

While performing the duties of this position, you will work in an office environment as well as on the manufacturing floor. You will occasionally work near moving mechanical parts and in precarious places. This position is occasionally exposed to wet and humid conditions, fumes, airborne particles, toxic or caustic chemicals, and the risk of electrical shock and vibration. The noise level in the work environment is usually quiet to moderate. Responsibilities will include:
• Operation/Function reflective of the company Quality Management System and customer certifications/flow downs relevant to the position.
• Provide leadership, communicate the plan, provide feedback, identify/assist in solving issues.
• Drive continuous improvement measurables that effectively support meeting or exceeding company objectives and goals.
• Assist with root cause investigation and corrective action plans.
• Assist in developing plant layout by planning rearrangement of facilities, equipment, and operations for the best utilization of resources.
• Identify – Research – Design – Implement new processes technology, methods, and manufacturing equipment to improve process flow, increase capacity, improve quality and reduce production flow inhibitors.
• Identify and implement opportunities to improve the value stream and lead 5S within the company.
• Drive and implement continuous improvements through lean tools, researching new technology, industry data, and developing resources to remove/manage the eight wastes.

Position Requirements
• Four-year degree and/or relevant work experience in a continuous improvement or an industrial engineering environment highly preferred.
• Must possess strong internal and external communication skills.
• Ability to influence others without formal authority. Partners well across functions and groups in all areas of the business. Able to effectively negotiate and discuss areas of concern.
• Must have a practical understanding of engineering drawing interpretation, experience with AS/ISO, and EAR/ITAR is preferred.
• Must be able to work with little to no supervision after the initial training period, showing a high degree of initiative and self-motivation. Must consistently demonstrate informal leadership and excellent work ethic.
• Experience with manufacturing systems, quality/continuous improvement initiatives, manufacturing safety practices preferred.
• The ability to teach and train others in Lean as needed.
• Must be able to maintain the confidentiality of customer and company information.
• Required talk/hear and occasionally required to sit, stand, walk, use hands to finger, handle, feel or operate objects, tools or controls.
• Occasionally required to reach with hands and arms.
• May require the ability to occasionally lift up to 50 pounds. Over the road and airline travel are required as needed to support the company.

Job Description

Go to end  ⇓
Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals for Mechanic positions with the largest manufacturer of steel products in North America.

Position Details
Location: Lexington, NC
Compensation: You can realistically expect your 1st year total compensation to be $100K – $110.7K
• Base & Productivity ($42.12 – $46.44/hr, to start): $87,610 – $96,596
• Average Overtime (20%): $12,804 – 14,117
Pay raises are excellent; hard charging technicians can earn up to a 21.5% raise within the first year for meeting qualifications on multiple plant equipment. Promotions provide outstanding compensation, which is why so many former military service members work here.
Shift: Monday through Friday, 6:30am – 4pm (approx. 20% OT); Plant will start up in Q4 of 2024 and shifts will move to a 4 on and 4 off 12-hour rotating shift schedule at that point.
Benefits: Company has one of the industry's most flexible and comprehensive health benefit programs (Medical / Dental / Vision), which includes wellness and health care spending accounts.
• Profit Sharing: each year, the company takes 10% of its operating profits and divides them up among all employees (except senior officers) - depending on company performance, this may be anywhere from 1% to over 20% of your pay.
• 401K: Generous plan that matches your first 7% of contributions.
• Tuition Reimbursement: Company takes continuing education seriously; they will reimburse up to $3,000 of your approved educational expenses each year, and also reimburse your spouse up to $1,500 per year for a maximum of 2 years. Additionally, the company provides the children of every employee up to $3,000 worth of scholarship funding each year to be used at accredited academic institutions.
Career Progression: Virtually limitless. Nowhere will you find a company more committed to the professional growth and promotion of its employees than within the company.
COVID Vaccination: None

Position Description
As a Mechanic, your responsibilities will include:
• Safely maintain and conduct preventative maintenance on all production machinery as well as facility utilities.
• The maintenance team supports plant operations while working closely with all other departments in planning future needs and/or improvements.
• This position must help drive continuous improvements in production tracking, process efficiency, and plant automation.
• Safety is the most important part of all jobs within the company; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Position Requirements
• From a technical perspective, must be able to demonstrate good mechanical systems troubleshooting and repair skills, as well as a strong theoretical knowledge of industrial mechanical systems.
• Strong background in hydraulics/pneumatics, gearing (Gearbox / Inspections / Parallel vs. Helical / etc.), welding, and motor alignment // candidates do not have to have strengths in each of these industrial mechanical areas, but they do want well-rounded industrial mechanics.
• Demonstrated history of safe work practices and the ability to work with minimal direction
• Be prepared to demonstrate the ability to interpret drawings for repair, installation, and maintenance of complex systems and equipment.
• Sincere commitment to the safety of self and team.
• Driven by results.
• Sincere commitment to the environment.
• Sincere commitment to the continuous development of self and others.
• Sound analytical and troubleshooting skills.
• Solid theoretical knowledge of mechanical principles. This position must help drive continuous improvements in production tracking, process efficiency, and plant automation.
• Safety is the most important part of all jobs within the company; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Job Description

Go to end  ⇓
Orion Talent, a customer-centric company focused on helping people discover meaningful careers and businesses grow by finding, delivering, and engaging the best talent around the world, is currently recruiting for a Maintenance Technician position with a family-owned company that produces premium dairy products.

Position Details
Location: Akron, NY
Compensation: $30.85/hr + $1.25/hr HAZMAT premium once certified
Shift: 2nd 3:00pm-11:30pm or 3rd 11:00pm-7:30am
Benefits: Top tier benefits package includes- Medical insurance and employer paid Dental plans, 401(k) with employer match, Paid Family Leave, Paid Vacations, tuition assistance.

Position Description
As a Maintenance Technician and core member of the Maintenance team, you will repair, install, and maintain Electrical Systems and Equipment such as motors, starters, VFDs, transformers, wiring switches, and alarm systems in accordance with the National Electrical Code and any applicable local codes. You will maintain facilities, production equipment, and production support systems.

Position Requirements
• Industrial Electrical experience.
• Experience with electrical control circuits and 3-phase power up to 480 volts.
• Must have education to back up experience.

Job Description

Go to end  ⇓
Position Details:
Title: Field Service Technician
Location: Portland, OR
Shift: Mon-Fri Day Shift
Compensation: $30-$35/hour + OT
Benefits: Medical, Dental, Vision insurance / Company Vehicle & Phone / 401(K) / Holidays + PTO / Profit Sharing
Travel: This is a traveling Field Service role mainly within the local Portland, OR area every day. There are some clients who require overnight travel which amounts to anywhere from 1-5 nights of overnight travel per month on average.

Position Description:
The Field Service Technician will perform service repairs in the field at various customer sites within the assigned region. In this role, you will review work order and related manuals, blueprints, and schematic diagrams to determine tasks to be performed and tools, equipment and parts needed for service assignment. Such duties include, but are not limited to:

Repair industrial machinery such as: air compressors (5-500HP), positive displacement pumps, liquid ring pumps, refrigerated dryers, desiccant dryers, and vacuum systems.
On field service calls, discuss assignment with customer’s representative and inspect installation site to verify that electrical supply wires, conduit, switches and circuit breakers are installed according to specifications.
Read/follow sketches, schematics, blueprints, manufacturer’s specifications, and maintenance manuals to determine troubleshooting procedure.
Troubleshoot, diagnose and perform repairs using system troubleshooting methodology and diagnostic tools.
Visually inspect and listen to machines and equipment to locate causes of malfunctions, Dismantle machines
Verify that electrical power is reaching the compressed air equipment and that voltage is as specified, using testing instruments.
Test electrical components: such as, wiring, switches and relays, using test instruments, and replace faulty components.
 

 

Requirements:

Knowledge of mechanical & electrical principles (4+ years military technician experience, technical/trade school, industry experience, etc.)
Experience with compressors, pumps, or vacuum systems preferred.
OSHA EPA Universal and refrigeration training preferred.
Ability to recognize common mechanical and electrical components.
Apply system troubleshooting skills effectively and possess customer relations skills.

Job Description

Go to end  ⇓
Position Details:

Title: Manufacturing Equipment Maintenance Technician
Location: Durham, NC
Shift: 12-hour shifts (Sun/Mon/Tue and every other Sat) or (Wed/Thu/Fri and every other Sat). Both day and night shift opportunities (7a-7p OR 7p-7a). Night shift is top priority and flexibility is necessary.
The shift would either be Front End, Back End or a 2-2-3
Compensation: Starting hourly rate is dependent upon experience but will range from $24.50-$31
Shift differential (5% for day shift; 15% for night shift)
Overtime opportunities
Annual performance & merit bonus
Benefits: comprehensive medical/dental insurance plan, 401K retirement plan with matching, employee assistance program, tuition assistance, paid time off (PTO), restricted stock units.
Travel: None
Position Description: As a Manufacturing Equipment Maintenance Technician you will you preform regular corrective, preventative and predictive maintenance on semiconductor tools. You will troubleshoot to solve mechanical, electrical, and pneumatic equipment problems alongside regular maintenance tasks such as calibration, equipment cleaning, and routine servicing. You will use computer maintenance systems for inventory and work scheduling, handle some gases and chemicals, and communicate with all support team members.

Requirements:

Associate degree in EE or military equivalent.
Manufacturing experience, preference to the semiconductor industry.
Preference for strong electronics background. PLC and troubleshooting experience is a plus.

Job Description

Go to end  ⇓
R.F. MacDonald

Position Details:

Title: Boiler Service Technician

Location: Las Vegas, NV

Travel: Travel is required for this position to customer sites with out-of-area and possible overnight travel expected.

Shift: Full-time position. Days and hours of work are Monday through Friday, 7:00 am to 4:00 pm. This position regularly requires long hours and travel work as job duties demand

Compensation: $35 – $45p/h DOEQ with overtime (regular hours are 06:30 AM – 2:30 PM, usually 2 hours overtime a day)

Benefits: R.F MacDonald Co. (California’s largest boiler sales and service organization) offers a full benefit package which includes Holiday pay, 401K, Medical and Dental, generous vacation (PTO) and room for advancement.


Position Description:

A Boiler Service Technician – Apprentice is required to troubleshoot industrial and commercial boilers and associated burner/control systems as well as all ancillary equipment. R.F MacDonald Co. represents product lines such as Cleaver Brooks, Fulton, Camus, Industrial Combustion and others.

Have 1 to 7 years of experience in troubleshooting and servicing boilers from light commercial to industrial water- tube and Cogeneration applications.
Hands on ability for combustion set up and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 million BTU/HR input.
Experience with Low Emission burners and related equipment is a plus but not a requirement.
Must have good communication skills and the ability to work in a team atmosphere.
Accountable for the completion of internal and external inspections of boilers, burners, and associated controls that determine function ability and expected service life.
Repair and/or replace refractory, gaskets, parts, and miscellaneous controls.
Perform hydrostatic testing of boilers, troubleshooting and repair of industrial burners.
Evaluate basic boiler room systems (steam and hydronic), gather information and help solve problems.
Understanding of all types of hot water and steam boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment. Experience with low emission burners and related equipment is a plus.
Instrument calibration experience and education with hands on experience is a plus. Meters, loop controllers, transmitters and thermocouples are everyday instruments in use with this equipment, ideal candidate will posses knowledge in troubleshooting, installing and calibrating these types of instruments and controls utilizing the latest in calibration instruments.
Requirements:

Physical Requirements
Be able to bend, kneel, stand, squat and climb frequently.
Must have the ability to lift 50 pounds, carry 50 pounds, roll out tubing and push/pull heavy materials w/mobile equipment.
Must be able to work in confined space/areas.
Must pass a physical (fit test), hearing and eye exam
A valid driver's license is required with a clean record. Must be insurable with no major infractions. Job will require some travel. Applicants must pass pre-employment background and an initial and subsequent random drug screening tests.
Must be professionally presentable, must have good customer skills and strong communication skills, must be able to operate independently and communicate efficiently and effectively with both the customer and management.
Must be detail oriented in completing work orders, all required forms, summaries, and checklist daily or as required in procedures manual.

Job Description

Go to end  ⇓
Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals for Technical Electrician positions with one of the largest snack companies in the world.

Position Details
Location: Naperville, IL
Compensation: $37.75/hr. $0.25/hr 2nd shift $0.30/hr 3rd shift differential.
Shift: Monday-Friday, Able to work any shift. Weekends are only needed on an Overtime basis.
Travel: None
Benefits:
• Health, Group life insurance and Savings plan
• Thirteen paid Holidays per year
• Increasing paid time off
• 401(k) Savings Plan
Vaccine Requirement: No

Position Description
As a Technical Electrician, you will independently operate and maintain at least one process, equipment, or systems following autonomous maintenance (AM) standards and use your technical skills to improve line and/or system performance to meet business needs.

Position Requirements
• An understanding of Basic Electronics.
• Basic Electrician/Electronic Technician skills, AB and TI PLC's temperature control, PID loops, RTDs, TC's pressure level, humidity/moisture, pH, electronic scales, photoelectric sensors, etc.
• PC skills - replace and reconfigure personal computer utilized in process applications.
• Ability to install and maintain motors, motor control circuits, VFD drives, and 480v-power distribution.
• At least 2-4 years of manufacturing experience as a hands-on Electrician or successful completion of an approved Apprenticeship Program.

Job Description

Go to end  ⇓
Position Details:

Title: EPC Business Development Leader (Industrial)

Location: Remote – CA, OH or TX ideal

Compensation: Market competitive – depends on experience - $190k base salary range plus bonus.

Benefits: Highly competitive and comprehensive benefits include:
- Medical, Dental, Vision plans, Short and Long Term Disability plans, Wellness Program.
- 401(k) Plan with match, Flexible Spending Accounts, Tuition Assistance, Adoption Assistance and Commuter Program.
- Life and Accident Insurance plan, Auto and Home Insurance plan, Business Travel Insurance.
- Paid Time Off, Flexible Work Options, Employee Assistance Program.

Travel: 30% nationwide

Vaccine Requirement: No corporate vaccine policy

Position Description: Seeking a Business Development Leader to help further accelerate the growth of their Industrial business unit by identifying promising new opportunities, winning exciting new projects and growing key client accounts. Typical project sizes range from $5M-$150M – most in the $10M-$75M range. This individual will bring experience selling small-mid capital sized engineering procurement construction (EPC) design-build delivery projects, ideally with experience in Water/Wastewater, Hydrogen or Decarbonization projects. This individual has helped clients successfully implement capacity/facility expansions, meet water management objectives, comply with environmental requirements, or address other related needs.

- Lead business development, client engagement, client service management, and strategic marketing for multiple major industrial clients in the U.S.
- Develop and maintain high value relationships with industrial clients
- Grow market share by partnering with senior project managers and key technical specialists as they work for clients to deliver high quality projects
- Collaborate with our award-winning technology group to stay at the forefront of leading-edge tools that improve project delivery for clients
- Implement short and long-term strategies that contribute to growth and profitability of the company

Requirements:
- Bachelor's degree – prefer degree in Engineering and/or MBA, MS or MA degree. Equivalent additional directly related experience will be considered in lieu of a degree.
- 12+ years of related experience.
- Able to travel approximately 30% of the time. 95% of the Industrial business is in the U.S.
- Expert knowledge of corporate governance practices, organization design principles, accounting principles, finance, supply chain management, and organization management.
- Excellent interpersonal, written and oral communication skills.
- Ability to understand highly complex technical, professional and business materials.
- Prefer EPC business development experience in industrial markets with demonstrated client relationship building in at least one of the following areas: oil/gas, chemicals, food/beverage, power, utilities, mining/mineral, and industrial water and wastewater.

Company: Orion's client is a privately owned, global engineering and construction firm providing client service and smart solutions in water, environment, transportation, energy and facilities. Our client's Industrial Division is experiencing tremendous growth with significant growth expected for at least the next 3-5 years in the primary markets they serve and solutions they deliver – Chemicals, Food & Beverage, Industrial Manufacturing, Metals & Mining, Oil & Gas and Power & Renewable Energy.

Why this opportunity?:
Our client stands out among Engineering and Design companies – they 100% embrace technology and innovation, and their project sizes are large enough and small enough to innovate in a meaningful way. As well, they are incredibly growth-minded, while not all about selling hours for dollars - and much of their growth is being driven by the Industrial Services Division. They are looking for high-caliber, highly experienced mid-career BD leaders who are hungry and motivated to grow the Industrial Division and be a part of an innovative and winning team!

Job Description

Go to end  ⇓
Title: Industrial Project Manager – Water/Wastewater
Location: Can be based out of any of our client's 30+ U.S. offices.
Shift: M-F Hybrid work schedule preferred, but can be Remote, with occasional travel to the company's offices and client offices.
Compensation: $150k-175K Base Salary (or more), depending on experience and location, plus Bonus.
Benefits: some of the most competitive and comprehensive benefits in the industry:
• Medical, Dental, Vision plans, Short and Long Term Disability plans, Wellness Program.
• 401(k) Plan with match, Flexible Spending Accounts, Tuition Assistance, Adoption Assistance and Commuter Program.
• Life and Accident Insurance plan, Auto and Home Insurance plan, Business Travel Insurance plan.
• Paid Time Off, Flexible Work Options, Employee Assistance Program.
Travel: Able to travel approximately 10% of the time – may vary depending on workload and project demands.
Vaccine Requirement: No corporate vaccine policy.

Position Description:
Our client is seeking a Senior Project Manager with experience managing small to large Consulting, Design and Design-Build industrial Water and/or Wastewater projects. As part of their Industrial Division, you will be the main point of contact for planning and design of water and wastewater projects with clients in a variety of industrial sectors. Typical project sizes range from $5M-$150M.
• Managing and serving as the lead Project Manager on water/wastewater projects
• Providing technical guidance, senior leadership, and mentoring engineering staff to enhance water/wastewater design capabilities
• Being responsible for scope, schedule, budget development, monitoring and adherence for projects managed
• Completing Quality Assurance/Quality Control of key deliverables and assisting on projects managed by others in the office
• Assisting Client Service Leaders with technical marketing for clients throughout the U.S.
• Participating in professional societies relevant to the industry
• Building and maintaining positive working relationships with key decision makers in clients’ organizations

Requirements:
• Bachelor's degree in Civil, Environmental or Chemical Engineering, or related degree
• 10+ years of related experience
• Able to travel approximately 10% of the time – may vary depending on workload and project demands
• PE license strongly preferred.
• PMP (PMI), CCM or DBIA certification is required (within 12 months of hire or promotion onto the Approved Project Manager list)
• Experience working with project management methodology including budget development, project planning, control and assurance methodologies, project management software and finance and accounting concepts and practices.
• Excellent communication skills both verbal and written.
• In-depth knowledge of project goals, drivers, strategies, risks and opportunities.
• Good interpersonal and presentation skills for interacting with team members and clients.
• Ability to interact with many people and process a large volume of requests as necessary.
• Excellent personal computer skills including strong knowledge in MS Word and Excel.
• Strong organizational skills to balance and prioritize work.

Preferred Qualifications:
• Professional engineering (PE) license, strongly preferred.
• Previous experience working on and managing projects for Industrial water/wastewater clients.
• Previous experience managing multi-discipline project teams.
• Excellent communication, networking and team building skills.
• Previous experience working directly with clients
• Master’s degree.
• Previous business development experience including preparation of proposals and scopes of work and costs estimates for industrial clients

Company Description:
Our client is a global privately owned engineering and construction firm that provides client service and smart solutions in water, environment, transportation, energy and facilities.
Their industrial team provides full-service solutions—process engineering and plant betterment, facilities and infrastructure improvements, comprehensive environmental and water services, and various specialty offerings—to various industries. This allows their team to take sole responsibility for project delivery, from initial concept development through design, construction, commissioning and O&M.

Why this opportunity?:
Our client’s Industrial Division is experiencing tremendous growth with significant growth expected for at least the next 3-5 years in the primary markets they serve and solutions they deliver - they plan to become a $3B company, with much of that growth coming from the Industrial Division.
Our client attracts the best people in the industry, supporting their efforts to learn and grow. They strive to create a challenging and progressive work environment. They provide career opportunities that span a variety of disciplines and geographic locations, with projects that their employees plan, design, build and operate as diverse as the needs of our clients. As well, they 100% embrace technology and innovation, and their project sizes are large enough and small enough to innovate in a meaningful way.
Leadership and culture are extremely important to our client. They are looking for high-caliber, highly experienced leaders who are hungry and motivated to grow the Industrial Division. There is tremendous opportunity to advance in your career.

Job Description

Go to end  ⇓
Position Details:
Title: Engineer I
Location: Seattle, WA
Shift: 2nd Shift (4 days a week, 10 hour shifts)
Compensation: $35-$37/hour + OT + 10% bonus
Benefits: Medical, Dental, Vision insurance / 401(K) / Holidays + PTO / much more!
Travel: None
Vaccine Requirement: Not required

Position Description: The Engineer position is a contributing member to the site level Data Center Operations team assigned to one or more of our data center properties reporting directly to the Manager of Facility Engineering. The Engineer I will have experience in mission critical infrastructure, including Generators, UPS Systems, HVAC Systems, Fire/Life Safety Systems, BMS Systems, and CMMS systems. It is expected that the Engineer I candidate has expertise in either electrical work or mechanical work and it would be expected that he/she would be competent in the area of non-expertise. The responsibilities of the Engineer I are:



Contribute to the daily site operation, including creation and modification of site operating procedures
Contribute to creation of change management tickets and timely incident reporting
Site maintenance and repairs/inspections to help ensure Digital Realty’s data center operations achieve the highest level of availability


Requirements:

4+ years experience as a Navy Nuclear Operator/Technician
Experience in mission critical facilities operating / engineering or equivalent equipment experience including assets associated with mission critical engineering relevant to the specific site. (UPS, HVAC, generators, fire/life safety systems).
Hands-on electrical or mechanical skill and competence in the area of non-expertise (for example, electrical expertise with mechanical competence, or vice-versa).
Strong knowledge of various UPS Systems and architectures.
Strong knowledge of various cooling systems and architectures.
Strong knowledge of energy efficiency principals.

Job Description

Go to end  ⇓
Position: Field Service Technician
Location: Seattle, WA
# openings: 1

Shift: M-F-8 hours shifts, 5 days a week pending active outages/projects
Pay: $80-100k Overtime pay on top of salary- When on call over the weekend you'll be paid out $75 per day (up to $7,800 per year), plus a minimum of 4 hours of O/T at 1.5X your hourly rate for any service call. Company pickup truck provided that may be used for daily commuting (~$14k yearly value according to AAA). Timecard Pay Clock begins when you leave your house and ends when you arrive home (daily).


Vax: Not Required

Profile:
2 - 5 years of Operations experience highly desirable in many of the following fields:

• Air separation or similar complex process control function
• Instrumentation and control
• General maintenance of industrial equipment
• Compressors and compressor maintenance
• Industrial Mechanical
• Industrial Electrical or Electrician
• Heating, Ventilation, Air Conditioning (HVAC)

Job Description

Go to end  ⇓
Position Details:
Title: Shift Supervisor
Location: Fairfax, VA
Shift: 12-hour shift schedule that alternates between days and nights in a five on two off, two on five off pattern. These schedules include weekends, holidays, outage support and vacation coverage.
Compensation: $100,000
Benefits:
• $5,000 Signing Bonus
• Day 1 – Health Care Benefits, including dental and vision
• Wellness Program Incentives & Rewards
• Retirement Savings Plan and 401K with Company match up to 7%
• Paid Time Off (Vacation & Holiday)
• Short-Term & Long-Term Disability Benefits
• Tuition Reimbursement
Travel: None
Vaccine Requirement: No

Position Description: Located in Lorton/Fairfax, Virginia and reporting to the Operations Manager, the Shift Supervisor is responsible for the safe and efficient operation of the facility during an assigned shift, including the monitoring of boilers, turbine, and steam plant. The Shift Supervisor will routinely tour the plant and oversee the work of various personnel, while operating within all safety regulations, environmental limits and permits. In the event of emergencies or unusual operations, the Shift Supervisor will, if necessary, direct, or personally perform the required operations as well as coordinate the activities of all personnel involved.

Requirements:
• Qualified candidates must have 5 years or more of experience in power or resource recovery plant operations in a leadership role.
• While an Engineering Degree is desirable, hands-on experience with high-pressure boilers and electrical generation, as well as formal technical training is required.
• Must obtain & maintain an ASME QRO Provisional & Site-Specific Operators license.
• Experience in project management, job planning, setup, execution, job cost and time estimating.

Job Description

Go to end  ⇓
Position Details:

• Title: Maintenance Supervisor
• Location: Franklinville, NY (Initially work at Cuba, NY facility as new facility is completed)
• Shift/Schedule: 2 Positions on 1st, 2nd and 3rd Shifts
• Compensation: $70-95k + bonus (~8-10%)
• Benefits: 401K, MED/DEN/VIS and Employee Stock Option Plan
• Relocation: Available
• Openings: 6

Position Description:
As a Maintenance Supervisor you will supervise and schedule the maintenance of all plant systems. In addition, the Supervisor will supervise preventative maintenance program and coordinate work that is contracted to outside companies.

Requirements:
• Associate’s degree/higher or equivalent military training
• 4+ years of maintenance leadership experience in military or post military manufacturing experience
• Any experience with ammonia refrigeration systems/PSM is a plus but not required
• Able to coach, mentor and develop team members while maintaining a high level of morale

Job Description

Go to end  ⇓
Position Details:
• Title: Field Service Engineer
• Location: Newark, NJ
• Shift: Mon-Fri
• Travel: Weekly travel. Leave on Monday to customer site, return home Friday morning.
• Compensation: $85k - $90K base
o Bonuses/Additional Compensation: Sign-on bonus, Relocation package, Quarterly Bonus up to $1200 per, vehicle has the mileage paid, travel with a company credit card
• Benefits: Medical, dental, vision, 401K, paid vacation days, FSA and Employee Assistance Program, and Tuition Assistance
• Vaccine Requirement: None

Position Description:
• Executes customer support activities involving the installation, modification, and repair of complex nuclear measurement equipment and systems.
• Conduct on-site installation of complex nuclear measurement equipment and systems, focusing on the setup/configuration of (Canberra) hardware and software, using established testing procedures and training to ensure proper function of system(s). Provide familiarization to the customer on system hardware/software and its basic modes of operation.
• Troubleshoot and isolate equipment malfunctions and take corrective actions, analyzing hardware or software issues. Work closely with Technical Support and Engineering to locate and correct system faults.
• Complete Field Reports and logs to ensure work performed is properly documented and all problems in the field are reported and addressed. House Troubleshooting and Repair
• Technical Support (by phone/email)
• Provide professional representation of the Company in all dealings with customers, creating a positive experience for the customer.
Desired Qualifications:
• 1-3 years in a technical/customer service position. Must have excellent technical and customer relations experience to handle the diversity of systems and their applications.
• Naval Nuclear Power Program experience is a plus.
• Knowledge and proficiency of any of the (Canberra) products such as High Purity Germanium (HPGe) Detectors, Sodium Iodide (NaI) detectors, and Alpha Beta Counting Systems
• Experience using (Canberra) software such as Genie 2000, Apex Gamma, Apex In-Vivo, Eclipse, and Apex Alpha Beta.
• Database management experience using SQL Server, Crystal Reports and/or Access.
• Nuclear Physics and Radiation Principles knowledge and experience
• Understanding of Gamma Spectroscopy, Alpha/Beta Counting, and radiation detection principles a plus.

Job Description

Go to end  ⇓
Position Details:
Title: Instrument Technician
Location: Angier, NC
Shift: M-F; rotating on call weekends (max once a month)
Compensation: $20-$25/hr (related skills/ No experience) or $25-$35 (related skills & Experience) + Company Credit Card + Per Diem
Benefits: Comprehensive Corporate Benefits Package; ESOP; Company Paid training/ certifications
Travel: 25%; Can range from 1-3 days typically. Average once a quarter

Position Description:
Perform calibration, maintenance, testing, troubleshooting, and repair of a variety of industrial environmental air sampling and continuous emissions monitoring systems (CEMS) and components. Maintain all logs and required documentation of audits, repairs, and preventative maintenance. Work independently on assignments that are moderately complex in which experience and knowledge are required to calibrate instruments and to solve problems. Follow quality assurance and quality control procedures for the equipment. Work is performed predominantly at company operated maintenance facility but also requires work externally at various industrial locations throughout North America.

Requirements:
A candidate for this role should have strong electrical skills and mechanical and pneumatic experience with 2 years of real-world experience. A candidate with 6+ years of experience in equipment repair and calibration, laboratory equipment repairs, medical equipment repairs or specialty repairs such as radios/ sonar / toxic gas detection would have related experience. Candidates must have a valid driver’s license and maintain compliance with random drug screens. Must not be afraid of heights.

Job Description

Go to end  ⇓
Position Details:
Title: ASME Authorized Inspector
Locations: Marinette, Wisconsin
Shift: 1st shift
Compensation: $28/hour (pay increases to $35 - $40/hour after you obtain your National Board Commission)
Benefits: Company offers a comprehensive benefits package including Medical, Dental, Vision, 401k, Life and Disability Insurance as well as generous PTO.
Travel: You will have one fulltime shop you support in Marinette, Wisconsin.
Vaccine Requirement: No vaccine requirements.

Position Description:
As an Authorized Inspector you will travel to client sites to perform basic inspections of Boilers and Pressure Vessels manufactured by OneCIS clients to ensure compliance with ASME Codes, Standards, and Jurisdictional requirements.

Additional responsibilities include:
• Review fabrication drawings, manufacturing standards and witnesses testing of Boilers and Pressure Vessels.
• Document and monitor the Quality Control System through ASME review and verification process.
• Ensure compliance with applicable sections of the ASME Code, National Board Inspection Code and Jurisdictional requirements for fabrication and Repair and Alteration activities and authorized inspection services.
• Certify products based on ASME Code requirements or submits recommendations for corrective action to ensure compliance with Code and Jurisdictional requirements.

Prior to becoming an Authorized Inspector, you will need to complete a training period that includes attending a 3-week long American Society of Mechanical Engineers (ASME)/National Board training/certification commissions school in Columbus, OH (all expenses paid).

Requirements:
The ideal candidate has a high school diploma and equivalent (Military) work experience, or a bachelor’s degree in mechanical or electrical Engineering. You should also have 3-5 years of mechanical experience in the boiler and pressure vessel industry (power plant, either Nuke or conventional), such as design fabrication, operation, repair and alteration, inspection, and nondestructive examination, or quality control systems.