Description

TIG Welder

Description

D.C. Fabricators, Inc.

• Develop integrated project plans, project schedules, and budgets by coordinating the efforts of all required disciplines. Plans, schedules, and budgets will be consistent with customer schedule requirements and specifications, as well as Company’s cost objectives and resource constraints in order to control orders from receipt through completion.
• Develop and maintain an overall project schedule for all major phases/elements of an order, defining the required contributions of each technical and/or administrative discipline.
• Interface with the customer on a regular basis to assure that the Company’s interests are communicated to the customer, and the customer’s interests are communicated within the Company.
• Identify possibilities and strategies for new business with the customer.
• Interface with the customer on a regular basis to resolve quality, contractual, and technical issues.
• Develop a project budget plan relating to each phase of the contract. Analyze project costs (actual vs. planned) and develop corrective actions necessary to resolve unfavorable performance.
• Analyze, update, and discuss the Contract Performance reports on a quarterly basis.
• Develop “make/buy” strategies consistent with internal resource constraints and project budget plans. Coordinate these “make/buy” strategies with the Purchasing function, and other required disciplines, on a timely basis to insure that project goals are met.
•  Provide project information to management, internal disciplines and customers in order to anticipate project issues and resolve problems.
• Develop proposals for major government/commercial customers in accordance with specification requirements. Review Request for Proposal documents including terms and conditions, specifications, drawings, and schedule. Develop strategies for proposal pricing consistent with Company objectives.
• Provide customer with project status reports as required by contract, or as deemed necessary by the Company.
• Participate in negotiations on contract and technical changes relative to cost and schedule impacts.
• Communicate with management on a routine basis to apprise management of issues which may affect Company operations, e.g. delayed shipments which would affect cash flow, cost overruns which would affect profitability, customer delays which would impact Company’s human resources, etc. Focus should be on anticipating these issues in advance and developing plans to mitigate any negative affects.
• Provide the liaison efforts with customers, vendors, and internal disciplines on matters specific to the contracts. Coordinate activities to support project plans.
• Interface with all required disciplines to communicate contract requirements and coordinate plans to assure that project plans are achieved. Examples include:
• Manufacturing Operations – schedular and cost objectives.
• Quality Assurance – quality planning, witness points, and resolution of non-conformance issues.
• Vendors – assist with communication of schedule, cost, and quality requirements to assure that project plans are achieved.
• Contracts – assist with developing constructive channels of communication with the customer.
• Engineering – develop schedules and departmental budgets.
• Finance – contract performance reports and accounts receivable.
• Management – visibility on all phases of a contract, including costs, schedules, and problem areas.
• Purchasing - develop material procurement plan and manage vendor performance.
  

• Accuracy – Ability to analyze/interpret commercial and technical data in order to manage existing orders in accordance with Company objectives.
• Detail Oriented – Must understand details, but primary functions relate to developing and analyzing the “big picture” of a project or contract.
• Ethical – Ability to perform at the highest level of ethical business standards to assure compliance with customer requirements, adherence to legal requirements, etc.
• Honesty/Integrity – Ability to be viewed as truthful and credible in the workplace, and with customers, in that the position’s primary functions relate to the ability to work collaboratively with all disciplines to achieve project goals.
• Organized – Ability to organize data and analyze problems in a structural manner is essential. Must organize input/data from multiple disciplines into a final result which is consistent with Company objectives.
• Communications - Ability to effectively communicate with both internal stakeholders and customers. Can discuss and relate complex business and technical issues to all levels of the organization.

Bachelor’s degree in an engineering discipline or equivalent experience. Specialized education/training in management or business administration may be considered as equivalent experience.

Four to five years experience in manufacturing and/or engineering administration in industries related to the fabrication of large equipment. A portion of this time should have been in planning, coordinating, and directing the efforts of others on extensive and complex projects.

Excellent computer skills required. Must have a working knowledge of Microsoft applications such as WORD, Excel, Outlook, Project, and Power Point, and of ERP systems.

• Knowledge of the company systems, processes and products, with the technical capability of analyzing administrative and technical requirements and applying equipment and technology to satisfy contract needs. This may involve knowledge of engineering, machine design, manufacturing, plant layout, material handling, materials, government/military and/or commercial specifications, financial spread sheet technology, scheduling methods, etc.
• Demonstrated ability to motivate, guide and work cooperatively and effectively with others in order to obtain practical and effective results. The ability to communicate, plan, and analyze effectively is required. The ability to evaluate problems and then make sound decisions or recommendations is an inherent and fundamental requirement.
• Requires ability to obtain a personnel security clearance to the Secret level.
• Position involves occasional overnight travel to customers and suppliers.

Description

Technician (Journey Level), Power Generation

Description

• Technically
  Skilled – You have a strong working knowledge of generators,
  diesel and gaseous engines, AC/DC electrical systems (110-600 VAC),
  transfer switches, and power generation equipment.
• Experience
  - 3+ years’ experience and/or training in power generation
  field. 
• Education
  - Associates Degree (AA) from a college or technical school (not
  a requirement but preferred). 
• Problem-Solver –
  You excel at troubleshooting mechanical and electrical systems, diagnosing
  complex issues, and implementing effective solutions.
• Hands-On
  Expert – You are confident in performing inspections, repairs,
  and load bank testing to ensure generator systems operate at peak
  performance.
• Customer-Focused –
  You have excellent communication skills and can professionally interact
  with clients, contractors, and site managers.
• Self-Sufficient –
  You work independently, manage your time effectively, and complete jobs
  with minimal supervision.
• Safety-Minded –
  You understand and follow safety protocols to ensure compliance with
  industry standards.

• Perform
  field inspections, diagnostics, and maintenance on generators.
• Identify
  and repair issues in electrical and mechanical systems, including transfer
  switches and switchgear.
• Conduct
  load bank tests, battery tests, and charging system repairs.
• Troubleshoot
  and repair diesel and gaseous engines, including mechanical and electronic
  governors.
• Utilize
  diagnostic software to assess performance and identify deficiencies.
• Maintain
  accurate service documentation and ensure compliance with safety
  procedures.
• Requires
  regular driving to client sites, ensuring critical power systems remain
  operational.

• Safety
  Compliance – Strict adherence to company and industry safety
  regulations.
• Efficiency
  & Productivity – Ability to complete jobs accurately and on
  schedule.
• Customer
  Satisfaction – Provide outstanding service to clients and
  maintain professional communication.

• Compensation: $35.00
  - $57.00 per hour (based on skills and experience).
• Sign
  on Bonus of up to $10,000, depending on experience. ($5K will be at time
  of hire, $5K at 6 mo.) 
• Work
  Area: Seattle Metro Area
• Tools
  & Equipment: Must own and maintain a tool inventory suitable
  for the position.
• Travel
  & Licensing: Valid driver’s license required; must be
  insurable under company policy. Ability to work toward an electrical
  license for technicians.
• Work
  Schedule: Ability to work overtime, including nights and
  weekends, based on business needs.

• Competitive
  pay and benefits – Medical, Dental, Vision, 401K with up
  to 7% Company Match, PTO, 10 Paid Holidays, and more.
• Sign
  on bonus of up to $10,000, plus relocation assistance.
• Ongoing
  training and growth opportunities – Stay at the forefront of
  industry advancements.
• A
  high-impact role in critical power generation – Your expertise
  keeps vital systems running.

Description

Staff Engineer – Mechanical Systems

Location: Benicia, CA (Onsite)

Employment Type: Full-Time

• Bachelor’s degree in Mechanical Engineering or a related engineering discipline
• 15+ years of progressive, relevant mechanical engineering experience
• Demonstrated depth of expertise in a mechanical engineering specialization or industry segment
• Advanced proficiency with CAD software and engineering analysis tools
• Strong understanding of materials, manufacturing processes, and design-for-manufacturability principles
• Proven experience conducting and interpreting prototype and validation testing
• Strong analytical, problem-solving, and root cause analysis capabilities
• Ability to communicate complex technical information clearly and effectively
• Experience designing and manufacturing centrifugal and/or reciprocating compressors
• Ability to travel up to 10% as required by business needs
• U.S. Citizenship or qualification as a U.S. Person per 22 CFR 120.15
• Ability to obtain a DoD security clearance (if required)
• Physical Requirements:
• Ability to stoop, kneel, crouch, bend, stretch, and reach
• Ability to lift up to 50 pounds regularly
• Ability to sit or stand for extended periods at desks, tables, machine tools, or printers

• Advanced degree in Mechanical Engineering or a related field
• Experience serving as a technical advisor or technical lead on cross-functional initiatives
• Background in regulated or high-reliability manufacturing environments
• Authorship of technical white papers, published articles, or formal technical presentations Patent holder

• A recognized technical authority with deep mechanical engineering expertise
• Analytical, detail-oriented, and capable of solving complex, high-impact technical problems
• A mentor and thought leader who elevates engineering capability across teams
• Comfortable influencing decisions without formal authority
• Collaborative, customer-focused, and able to translate requirements into robust technical solutions
• Motivated by innovation, technical excellence, and long-term product performance

• Base Salary Range: $160,000 – $180,000
• Work Style: Onsite (Benicia, CA)
• Relocation: Available for those that qualify
• Work Environment: Office-based with interaction around machine tools and testing equipment
• Benefits:
• PTO and 12 Paid Holidays
• Retirement 401(K) with company match
• Medical, Dental, and Vision insurance
• Group Term Life Insurance
• Tuition Reimbursement Program
• Referral Bonuses and more

Description

Service Engineer Level 3, Control Systems

• Perform advanced diagnostics and fault finding in mechanical, electrical, and automation systems.
• Install and commission control systems, actuators, and automation packages.
• Interpret and develop electrical and hydraulic schematics and control diagrams.
• Provide expert technical support and product recommendations to customers and internal teams.
• Train junior engineers and technicians in the field and during in-house sessions.
• Lead in-house system testing and support control system builds.
• Serve as a key support resource for technical applications and customer processes.
• Prepare accurate and timely service reports and documentation.
• Travel domestically and internationally for service assignments—up to 50%.
• Be willing for frequent overtime, including nights or weekends as needed.

Benefits

Description

Service Engineer, Turbocharger

Fully Remote • United States, WA

Description

• Perform advanced diagnostics and fault finding in mechanical, electrical, and automation systems.
• Install and commission control systems, actuators, and automation packages.
• Interpret and develop electrical and hydraulic schematics and control diagrams.
• Provide expert technical support and product recommendations to customers and internal teams.
• Train junior engineers and technicians in the field and during in-house sessions.
• Lead in-house system testing and support control system builds.
• Serve as a key support resource for technical applications and customer processes.
• Prepare accurate and timely service reports and documentation.
• Travel domestically and internationally for service assignments—up to 50%.
• Be willing for frequent overtime, including nights or weekends as needed.

• Education & Experience: Trade school degree with 5+ years of relevant industry experience, OR, 8+ years of relevant work in power generation or industrial automation in lieu of formal education
• Technical Knowledge:

• Strong mechanical and electrical troubleshooting.
• In-depth knowledge of power generation and industrial control systems.
• Familiarity with:
• Woodward controls (EGCP, GCP, MFR, easYgen, LS-4/LS-5, DSLC/MSLC).
• AVRs: Basler DECS, ABB Unitrol.
• PLC Programming: Woodward GAP, GE Fanuc.
• HMI/SCADA: AStudio, iFIX, Citect, Wonderware, RSView.
• Digital networks and communication protocols.

• Excellent written and verbal communication (English required; Spanish a plus).
• Ability to work under minimal supervision in dynamic environments.
• Proficient with Microsoft Office (Word, Excel, PowerPoint).
• Must possess or be able to obtain a TWIC card for secure facility access.
• Prior military experience is a major plus.

Work Environment & Physical Demands

• Ability to lift up to 50 lbs.
• Comfortable standing, kneeling, stooping, or working in confined spaces for extended periods.
• Willing to work outdoors in various weather conditions.

• Competitive hourly pay ($46.00–$53.00/hour DOE).
• Training & Career Development Opportunities
• Relocation assistance for qualified candidates.

• Medical, Dental, and Vision Insurance
• 401(k) with Company Match
• Paid Time Off and Company Holidays
• Life and Disability Insurance

Description

Solder Assembler - (2nd Shift 2:30pm-12:00am) - Phoenix AZ

Mercury Systems is looking for a top performer to help complete a variety of tasks relating to production operations on electronic and/or mechanical assemblies and subassemblies. To be successful, you will need to demonstrate professionalism, leadership and initiative in your daily activities, with excellent inter-personal and communication skills both oral and written.

This is a 2nd shift opportunity, daily hours will be from 2:30pm to 12:00am and overtime is available and encouraged.

Responsibilities:

• Install, assemble, and inspect electronic components during product assembly, per documented work instructions.
• Interpreting Job Routers, written instructions, wiring diagrams and schematic drawings for assembly of electronics.
• Performing a variety of inspections to ensure assemblies meet/exceed IPC standards.
• Performing pass downs with outgoing/incoming shifts. Using hand and/or power tools and jigs.
• Modifying, soldering, reworking, repairing assemblies and subassemblies according to specifications, drawings, and work instructions.
• Other duties as assigned by Lead or Supervisor.

Must Have:

• Must have meticulous hand-eye coordination and manual dexterity.
• Typically 3-5+ years of electronics assembly and inspection experience with in-process soldering (both through hole and surface mount).
• Must be able to work for extended hours utilizing a microscope to perform inspection and solder touch-ups.
• Hand soldering experience is required. Knowledge of ESD (Electrostatic discharge) procedures.
• High School Diploma or GED.

Good to Have:

• Rework/repair, wire attach, and mechanical assembly.
• Must be detail oriented and able to multitask. IPC-610, J-STD-001 and 7711/7721 certification preferred.
• Good written and verbal communication skills.
• Must be able to work a flexible schedule in order to meet production and customer needs.
• 10 plus years related experience is preferred.

"This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government."

Why should you join Mercury Systems?

• Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com

Our Culture

• We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition

reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions.

Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status.

As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance

Description

Shipfitter

Description

• Create and maintain all programs for the shop floor, using Siemens NX software.
• Works with the Project Managers (PM’s) and Manufacturing Engineers (ME’s) in evaluating requests for quote to determine if a program can be done cost effectively for the customer and the company.
• Works with PM’s, ME’s, vendors and others to gather any necessary information for new jobs.
• Coordinate jobs flowing through the department and verify data prior to being released to the shop.
• Work with the operation and engineering teams to resolve any programming issues.
• May develop programs for touch probe programming for on machine inspection and coordinate shifting. Support the development of touch probing standard procedures.
  

• Commitment to a safety culture where safety is the first consideration before starting any task.
• Experience using Siemens NX and SolidWorks.
• Experience with 5 axis and/or Swiss programming.
• Experience with SolidWorks assemblies and nesting parts into billets for machining of part families.
• Experience working with fixture concepts and designs.
• Experience with verification software, including machine simulation, verification, graphics capturing, multi-operations with in-process models, Auto-Diff, OptiPath, etc.
• Experience with maintaining postprocessors for a variety of machines and control types.
• Experience with touch probe macro programming and utilizing standards and procedures for the safe and effective use of probes on the shop floor.
  
  

• Graduate of related two-year vocational school program and three years related work experience and/or training; or equivalent combination of education and experience.
• Able to work in a dynamic environment with changing priorities to exceed customer expectations.
• Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision.
• Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time.
• Computer aptitude (Outlook, PowerPoint, Word and Excel).
• Ability to read, write, and communicate in the English language.
• Must be a team player and willing to learn new skills and concepts.
• Eligible to work in the United States without company sponsorship.

• The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment.
• For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility.

• Sit or stand as needed.
• Walking primarily on a level surface for periodic periods throughout the day.
• Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday.
• Proper lifting techniques required.
• Ability and comfortability to work in small confine spaces while following proper safety protocol.

Description

• 2nd Shift hours are 6pm-4:30am Monday - Thursday
• 3rd Shift hours are 6am-6pm Friday - Sunday
• 4th Shift hours are 5pm-5:00am Friday - Sunday

• Setup, operate and perform daily maintenance on manufacturing machines.
• Strictly adheres to proper use of personal protective equipment (PPE).
• Makes high quality parts to specifications
• Helps develop workable methods for machining operations.
• Makes proper use of machines, tooling, and inspection equipment.
• Sets up, machines, and inspects all required operations.
• Proficient at inspecting sizes and geometries down to .0002”.
• Provides leadership and guidance to less experienced machinists to upgrade their machining, inspection, and problem-solving skills.

• Commitment to a safety culture where safety is the first consideration before starting any task.
• Proficient on manual and CNC mills, manual and CNC lathes, hand filing, and deburring process.
• Proficient at programming and makes full use of all the CNC control functions
• Develops effective methods.
• Sets up tools and fixtures.
• Selects and uses inspection equipment and techniques.
• Interpret drawings and specifications.
• Determines acceptability of quality of work.
• Resolves process issues.
• Deburrs and finishes at a high level of quality.
• Meets time and quality standards.
• Seeks out additional duties when it is needed.
• Brings up potential problems with suggested solutions.
• Promotes a positive environment through what is said and by setting an example.

• Graduate of related two-year vocational school program and three years related work experience and/or training; or equivalent combination of education and experience.
• Able to work in a dynamic environment with changing priorities to exceed customer expectations.
• Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision.
• Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time.
• Computer aptitude (Outlook, PowerPoint, Word and Excel).
• Ability to read, write, and communicate in the English language.
• Must be a team player and willing to learn new skills and concepts.
• Eligible to work in the United States without company sponsorship.

• Medical, Dental, and Vision plans
• Life Insurance, Long & Short-Term Disability
• Flexible Spending Account and Dependent Care Spending Account
• 401(k) Retirement with Company Match
• Employee Assistance Program
• Paid time off and 10 paid holidays (including your birthday)
• Paid parental leave
• Additional opt in offerings

• The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment.
• For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility.

• Sit or stand as needed.
• Walking primarily on a level surface for periodic periods throughout the day.
• Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday.
• Proper lifting techniques required.
• Ability and comfortability to work in small confine spaces while following proper safety protocol.

Description

• To maintain and improve the safe working environment on the shop floor and its surrounding areas.
• To establish a proactive and reactive maintenance program.
• To actively participate in our safety program
• Fill machine oils, Empty chip hoppers, Sweep/run floor scrubber
  
• Clean coolant tanks, burr benches
• Troubleshoot/repair machines
• Building maintenance, Lighting, Electrical, Plumbing, Painting
• Maintain outside, parking lot, and dock area

• Commitment to a safety culture where safety is the first consideration before starting any task.
• Proficient in problem analysis, problem-solving and successful resolution.
• Demonstrate excellent interpersonal and group communication skills.

• Experience working in a manufacturing environment in a maintenance / technical role is preferred
• Experience with equipment installs and modifications in a manufacturing environment
• Experience working with CNC machines is preferred
• Preferred experience working in CAD
• Preferred additive OEM and FSE experience 

• Medical, Dental, and Vision plans
• Life Insurance, Long & Short-Term Disability
  
• Flexible Spending Account and Dependent Care Spending Account
  
• 401(k) Retirement with Company Match
  
• Employee Assistance Program 
• Paid time off and 10 paid holidays (including your birthday)
• Paid parental leave
• Additional opt in offerings 

• The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment.
  
• For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility.

• Sit or stand as needed.
• Walking primarily on a level surface for periodic periods throughout the day.
• Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday.
• Proper lifting techniques required.
• Ability and comfortability to work in small confine spaces while following proper safety protocol. 
• Ability to accomplish the physical requirements of the position with or without reasonable accommodation.

Description

• Measure key part characteristics with CMM equipment
• Perform CMM programming, setup, and analysis of both in process and finished products
• Work with engineering and programming teams to troubleshoot parts
• Perform first piece production inspection and provide feedback 
• Document findings and develop planning for jobs 
• Train others on CMM operation and appropriate methods
• Check and verify machined component dimensions using measuring devices to blueprints
• Communicate effectively with machinist, operators, and management to maintain acceptable quality standards
• Maintain and generate all required quality documentation including inspection and discrepancy reports
• Perform other miscellaneous duties as assigned or requested

• ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status.  
   

• Computer skills 
• Innovative thinker and a self-starter
• Solid problem-solver strong sense of urgency
• Good organization and attention to detail
  

• 2 year technical degree and/or 2 years shop floor machining
• 2 years shop Floor machining and/or 6 months Quality Inspection in machine shop environment
• Able to operate a CMM, including choosing appropriate tools and inspecting parts with minimal supervision
• Preferred experience with PC DMIS CMM software
• Knowledge of GD&T and general blueprint interpretation
   

• The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shoes, and other mandatory safety equipment.
• For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility.

• Sit or stand as needed.
• Walking primarily on a level surface for periodic periods throughout the day.
• Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday.
• Proper lifting techniques required.
• Ability and comfortability to work in small confine spaces while following proper safety protocol.
• Ability to accomplish the physical requirements of the position with or without reasonable accommodation.